L293D Motor-Stepper-Servo Driver Shield for Arduino
Specification
- Supplied Fully Assembled
- 2x 5V Servo outputs connected to the high-resolution dedicated timer - no jitter!
- Can drive 4 DC motors or 2 stepper motors or 2 Servo's
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
- Pull down resistors keep motors disabled during power-up
- reset button
- Tested compatible for Arduino Mega, Diecimila, Duemilanove, Arduino UNO
Perfect for use in various electronics projects in India, L293D Motor Driver Fully Soldered | Stepper Motor | Servo Motor | BO Motor Driver Shield for ensures reliability and performance. Ideal for various electronics projects, L293D Motor Driver Fully Soldered | Stepper Motor | Servo Motor | BO Motor Driver Shield for offers quality and performance.
2.4G NRF24L01 WIRELESS MODULE WITH ANTENNA
XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module LED w/ Heatsink
The XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. Perfect for use in various electronics projects in India, XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module LED w/ Heatsink ensures reliability and performance. Ideal for various electronics projects, XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module LED w/ Heatsink offers quality and performance.
Top 10 Final Year Free Project Ideas for Electronics and Telecommunication Engineering 2025–2026
Quadruped Spider Robot Combo Kit – -4 Legged DIY STEM Crawling Robot with Servo Motors – (022)
✅ Features: Quadruped Spider Robot Combo Kit – 6-Legged DIY STEM Crawling Robot with Servo Motors
-
4-legged robot with 12 servo joints (3 per leg)
-
Controlled via Bluetooth using any Android device
-
Powered by rechargeable 18650 batteries
-
Based on Arduino Nano – easy to program and customize
-
Perfect for STEM learning, school projects, and robotics enthusiasts
📦 Included Components:
-
1x 3D Printed Quadruped Body Frame
-
1x Arduino Nano with USB Cable
-
1x Nano I/O Expansion Shield
-
12x SG90 Servo Motors
-
1x HC-05 Bluetooth Module
-
1x ON/OFF Rocker Switch
-
2x 3.7V 18650 Li-ion Batteries
-
1x Dual 18650 Battery Holder
-
10x Female-to-Female Jumper Wires
How to Make - https://www.instructables.com/DIY-Spider-RobotQuad-robot-Quadruped/
40TPS12 Thyristor Transistor
SCR Thyristors are Current Operated Devices, a Small Gate Current Controls a Larger Anode Current.
• Thyristors are High Speed Switches that Can be Used to Replace Electromechanical Relays in Many Circuits.
• Thyristor is a Four Layer (P-N-P-N) Semiconductor Device that Contains Three PN Junctions in Series.
• Easy Installation By Its Miniature Size and Thin Electrode Leads, Low Cost. Perfect for use in various electronics projects in India, 40TPS12 Thyristor Transistor ensures reliability and performance. Ideal for various electronics projects, 40TPS12 Thyristor Transistor offers quality and performance.
12V Big Buzzer
NEO-6M GPS Module with EPROM
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
Perfect for use in various electronics projects in India, NEO-6M GPS Module with EPROM ensures reliability and performance. Ideal for various electronics projects, NEO-6M GPS Module with EPROM offers quality and performance.
68pf/ 50V ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor offers quality and performance.
Ceramic Capacitor 82pF 50V Through Hole Radial
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, Ceramic Capacitor 82pF 50V Through Hole Radial ensures reliability and performance. Ideal for various electronics projects, Ceramic Capacitor 82pF 50V Through Hole Radial offers quality and performance.
47pf 50v Ceramic Disc Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.000047uf/0.047nf/47pf 50v Ceramic Disc Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.000047uf/0.047nf/47pf 50v Ceramic Disc Capacitor offers quality and performance.
30A Range Electrical Parts Current Sensor Module ACS712 for Arduino
The 30A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Perfect for use in various electronics projects in India, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino ensures reliability and performance. Ideal for various electronics projects, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino offers quality and performance.