-54%
3 Pin JST XH Relimate Connector (RMC) Male-Female Pair With Wire/Cable
Original price was: ₹10.00.₹7.54Current price is: ₹7.54. + GST
FR307 Diode
Original price was: ₹6.00.₹3.28Current price is: ₹3.28. + GST
NODE MCU ESP8266 cp2102 Board
Original price was: ₹500.00.₹230.00Current price is: ₹230.00. + GST
Specification
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
Perfect for use in various electronics projects in India, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 ensures reliability and performance. Ideal for various electronics projects, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 offers quality and performance.
10 in stock
Description
- The NodeMCU with cp2102 Wifi Board is an all-in-onemicrocontroller + WiFi platformthat is very easy to use to create projects with WiFi and IoT (Internet of Things) applications. The board is based on the highly popular ESP8266 WiFi Module chip with the ESP-12 SMD footprint. This WiFi development board already embeds in its board all the necessary components for the ESP8266 (ESP-12E) to program and uploade code. It has a built-in USB to serial chip upload codes, 3.3V regulator and logic level converter circuit so you can immediately upload codes and connect your circuits. This board contains the ESP-12E chip with a 4MB! flash memory so no worries for your long project codes!
- TheESP8266 NodeMCU with cp2102 development board- a true plug-and-play solution for inexpensive projects using WiFi. The module arrives pre-flashed with NodeMCU firmware so just install your USB driver. The NodeMCU is an open-source project and you can find all the design files and so on from their github page.This microcontroller board can easily be programmed using the Arduino IDE programming software.
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102, electronic components India, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 buy online, electronic supplies India, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102, buy Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 online, electronics components, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 features, Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102 applications, high quality Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102
Reviews (19)
19 reviews for NODE MCU ESP8266 cp2102 Board
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
IR Proximity Sensor for Obstacle Sensing and Line Follower Robots
Proximity Sensorare used to detect objects and obstacles in front of sensor.
Sensor keeps transmittinginfrared lightand when any object comes near, it is detected by the sensor by monitoring the reflected light from the object. It can be used in robots for obstacle avoidance, for automatic doors, for parking aid devices or for security alarm systems, or contact less tachometer by measuring RPM of rotation objects like fan blades. Perfect for use in various electronics projects in India, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots ensures reliability and performance. Ideal for various electronics projects, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots offers quality and performance.
1N4148 Zener Diode
It is one of the most popular and long lived switching diodes because of its dependable specifications and low cost. The 1N4148 is useful in switching applications up to about 100 MHz. The 1N4148 comes in a DO-35 glass package for thru-hole mounting. Perfect for use in various electronics projects in India, 1N4148 -100V ,450mA | Diode Small Signal ensures reliability and performance. Ideal for various electronics projects, 1N4148 -100V ,450mA | Diode Small Signal offers quality and performance.
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
BC548 NPN 30V 0. 1A Transistor High quality
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Original Flex sensor 2.2 inches for Motion and Diy
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Jayen (verified owner) –
Online best cost electronic components
Vivek (verified owner) –
Good quality.
Komal (verified owner) –
I got my project done with these components Great Support
Viral (verified owner) –
Very well worth the money.
Vivek (verified owner) –
The product is firmly packed.
Jayen (verified owner) –
The product is firmly packed.
Prakash (verified owner) –
Drone parts i ordered and found ok
Zohar (verified owner) –
Online best cost electronic components
Er.Prashant (verified owner) –
The product is firmly packed.
Akshay (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
Drone parts i ordered and found ok
Komal (verified owner) –
Very fast delivery.
Akshay (verified owner) –
The product is firmly packed.
Sneha (verified owner) –
Online best cost electronic components
Viral (verified owner) –
Drone parts i ordered and found ok
Mayur (verified owner) –
Good support and recommended
Rohit (verified owner) –
Good Kit
Roma (verified owner) –
Best cost electronic components in India
Shubham (verified owner) –
Good Kit