-35%
DHT11 Temperature and Humidity sensor
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GST
1K Multiturn Potentiometer
Original price was: ₹15.00.₹8.20Current price is: ₹8.20. + GST
MAX232 – RS232 to TTL Converter 3V, 5V Compatible IC
Original price was: ₹28.00.₹18.08Current price is: ₹18.08. + GST
MAX232 is a communication IC. It is used to convert TTL Signals to RS232 Signal and vice versa.?MAX232?provides RS-232 voltage level outputs (approx. ? 7.5 V) from a single + 5 V supply via on-chip charge pumps and external capacitors. This makes it useful for implementing RS-232 in devices that otherwise do not need any voltages outside the 0 V to + 5 V range, as power supply design does not need to be made more complicated just for driving the RS-232 in this case.
40 in stock
Description
- Operate from Single +5V Power Supply (+5V and +12V?MAX231/MAX239)
- Low-Power Receive Mode in Shutdown (MAX223/MAX242)
- Meet All EIA/TIA-232E and V.28 Specifications
- Multiple Drivers and Receivers
- 3-State Driver and Receiver Outputs
Reviews (12)
12 reviews for MAX232 – RS232 to TTL Converter 3V, 5V Compatible IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
3.7V 1200 mAh 18650 Lithium Rechargeable Battery
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications. Perfect for use in various electronics projects in India, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery ensures reliability and performance. Ideal for various electronics projects, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery offers quality and performance.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Rahul (verified owner) –
The product is firmly packed.
Shubham (verified owner) –
Very fast delivery.
Priya (verified owner) –
Less cost than other websites
Er.Prashant (verified owner) –
Very well worth the money.
Komal (verified owner) –
Online best cost electronic components
Roma (verified owner) –
Drone parts i ordered and found ok
Komal (verified owner) –
Online best cost electronic components
Jayen (verified owner) –
Good support and recommended
Devendra (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Good techinical knowledge
Akshay (verified owner) –
Best cost electronic components in India
Mayur (verified owner) –
The product is firmly packed.