-33%
MOC3063 IC - Zero-Cross Triac Opto Isolator IC
Original price was: ₹30.00.₹14.00Current price is: ₹14.00. + GST
LM7812 IC-12V Positive Voltage Regulator IC
Original price was: ₹18.00.₹15.00Current price is: ₹15.00. + GST
LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
Original price was: ₹15.00.₹10.00Current price is: ₹10.00. + GST
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input c
80 in stock
Description
- Single Supply or Dual Supplies
- Wide Range of Supply Voltage
- Max Rating: 2 V to 36 V
- Tested to 30 V: Non-V Devices
- Tested to 32 V: V-Suffix Devices
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typ) Per Comparator
- Low Input Bias Current: 25 nA (Typ)
- Low Input Offset Current: 3 nA (Typ) (LM139)
- Low Input Offset Voltage: 2 mV (Typ)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ?36 V
- Low Output Saturation Voltage
Reviews (12)
12 reviews for LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
IR Proximity Sensor for Obstacle Sensing and Line Follower Robots
Proximity Sensorare used to detect objects and obstacles in front of sensor.
Sensor keeps transmittinginfrared lightand when any object comes near, it is detected by the sensor by monitoring the reflected light from the object. It can be used in robots for obstacle avoidance, for automatic doors, for parking aid devices or for security alarm systems, or contact less tachometer by measuring RPM of rotation objects like fan blades. Perfect for use in various electronics projects in India, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots ensures reliability and performance. Ideal for various electronics projects, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots offers quality and performance.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Priya (verified owner) –
Online best cost electronic components
Rohit (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very fast delivery.
Komal (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very well worth the money.
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very fast delivery.
Viral (verified owner) –
Very well worth the money.
Zohar (verified owner) –
Very well worth the money.