-25%
USB to TTL Serial Converter Adapter - Image 1
Click to enlarge
tb6600-stepper-motor-driver-controller
TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis Original price was: ₹800.00.Current price is: ₹465.42. + GST
Back to products
3.3V and 5V Power Supply for Breadboard | MB102 Bread Board Power Supply Module
3.3V and 5V Power Supply for Breadboard | MB102 Bread Board Power Supply Module Original price was: ₹108.00.Current price is: ₹48.38. + GST

USB to TTL Serial Converter Adapter

(1 customer review)

Original price was: ₹150.00.Current price is: ₹113.00. + GST

  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
  • Fully integrated USB termination resistors.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  • Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
  • 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.

Perfect for use in various electronics projects in India, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) ensures reliability and performance. Ideal for various electronics projects, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) offers quality and performance.

2 in stock

Add to compare
Add to wishlist
SKU: O-9 Categories: ,
Description

Specification

  • Material : PCB + Electronic Component
  • Support 3.3V, 5V
  • Main Color : Red
  • Chipset : FT232RL
  • USB power has over current protection, using 500MA self-restore fuse
  • RXD/TXD transceiver communication indicator
  • Pin definition : DTR,RXD,TX,VCC,CTS,GND
  • Pitch : 2.54mm
  • Module Size : About 36mm(length)*17.5mm(width)
  • Interface : Mini USB

Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.

Keywords: USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft), electronic components India, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) buy online, electronic supplies India, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) price.

Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.

Keywords: USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft), buy USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) online, electronics components, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) features, USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft) applications, high quality USB to TTL Serial Converter Adapter 3.3V Debug Cable TX RX Signal 3 Pin Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (3ft)

Reviews (1)

1 review for USB to TTL Serial Converter Adapter

  1. Lokesh (verified owner) –

    Very well worth the money.

Add a review
Shipping and Delivery
We deliver all across India.

✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.

Related products

Add to compare

1N4007 diode

,
₹0.82
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability. Perfect for use in various electronics projects in India, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant ensures reliability and performance. Ideal for various electronics projects, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant offers quality and performance.
Add to wishlist
Add to cart
Quick view
-77%
Add to compare

BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package

,
Original price was: ₹5.00.Current price is: ₹1.17. + GST
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
Add to wishlist
Add to cart
Quick view
-61%
Add to compare

BC327 PNP General Purpose Amplifier Transistor

,
Original price was: ₹5.00.Current price is: ₹1.95. + GST
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
Add to wishlist
Add to cart
Quick view
-55%
Add to compare

Crystal Oscillator 16 MHZ

,
Original price was: ₹15.00.Current price is: ₹6.72. + GST
Crystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers.
Add to wishlist
Add to cart
Quick view
-58%
Add to compare

74HC595 8-bit Shift Register IC

,
Original price was: ₹16.80.Current price is: ₹7.00. + GST
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Add to wishlist
Add to cart
Quick view
-6%
Add to compare

Voltage Sensor Module

,
Original price was: ₹16.00.Current price is: ₹15.08. + GST
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy. The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Add to wishlist
Add to cart
Quick view
-46%
Add to compare

DHT11 Temperature and Humidity sensor

,
Original price was: ₹120.00.Current price is: ₹65.00. + GST
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Add to wishlist
Add to cart
Quick view
-21%
Add to compare

8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry

,
Original price was: ₹312.00.Current price is: ₹246.16. + GST

Specification

  • This relay module is 5 Volts active low.
  • It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
  • It is also able to control various appliances and other equipments with large current.
  • Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Standard interface can be directly connected with microcontrollers.
  • Red working status indicator lights are conducive to the safe use.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
  • Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
  • VCC, GND : Input power.
  • JD - VCC : Relay power input port,relay can power alone.
  • Working voltage : 5V
  • Module weight : about 112g
  • package weight : about 150g
  • module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Perfect for use in various electronics projects in India, 8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry ensures reliability and performance. Ideal for various electronics projects, 8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry offers quality and performance.
Add to wishlist
Add to cart
Quick view