DHT11 Module Temperature Sensor And Humidity Sensor Module, Arduino, Arm And Other MCU
Original price was: ₹200.00.₹66.42Current price is: ₹66.42. + GST
Features of DHT11 Module
- The module can detect surrounding environment of the humidity and temperature.
- High reliability and excellent long-term stability
- Output form digital output
- Has fixed bolt hole (3mm) and easy installation
- Humidity measurement range : 20%~90%RH
- Humidity measurement error : ?5%RH
- Temperature measurement range : 0~50?C
- Temperature measurement error : ?2?C
- Working voltage : DC5V/3.3V
- Size : approx. 30x13x8mm (L*W*H)
12 in stock
- It uses thermistor to measure the surrounding air temperature and a capacitive humidity sensor to measure the moisture content. It sends digital readings on data pin so there is no need to use an Analog to Digital Converter (ADC) chip.?It is very easy to use but the only problem with this sensor is that it sends data every 2 seconds. There are lot of resources online on hot to interface DHT11 Sensor to Arduino which will make this sensor easy to interface to any Arduino Board.
1 review for DHT11 Module Temperature Sensor And Humidity Sensor Module, Arduino, Arm And Other MCU
You must be logged in to post a review.
Related products
-
1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant
Original price was: ₹1.15.₹0.82Current price is: ₹0.82.Add to cart1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
-
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Original price was: ₹5.00.₹1.17Current price is: ₹1.17. + GSTAdd to cartBC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
-
Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module
Original price was: ₹130.00.₹97.00Current price is: ₹97.00. + GSTAdd to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna. -
BC327 PNP General Purpose Amplifier Transistor
Original price was: ₹5.00.₹1.95Current price is: ₹1.95. + GSTAdd to cartBC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
-
100 MM x 2.5 MM, Nylon Zip Wire Organizer/Self Locking
Original price was: ₹10.00.₹1.64Current price is: ₹1.64. + GSTAdd to cartThis is a?100 x 2.5 mm Nylon cable tie?also known as hose tie or Zip tie. The?cable tie?is perfect for holding items together specially electric cables or wires.? The flexible design of the?cable tie?makes it easier to slip the ties under and around wire harness. Thanks to the teeth on one of the side of the belt makes it easier for self locking and securing the wires.
Zohar (verified owner) –
Good techinical knowledge