ULN2003 Stepper Motor Driver Board
Original price was: ₹52.00.₹38.00Current price is: ₹38.00. + GST
The ULN2003 Stepper Motor Driver Board uses ULN2003 Darlington arrays to control 4-phase, 5-wire stepper motors (5V-12V), making it ideal for Arduino and microcontroller projects.
87 in stock
The ULN2003 Stepper Motor Driver Board is a compact, reliable, and cost-effective solution for controlling 4-phase, 5-wire stepper motors operating between 5V and 12V. Powered by the ULN2003 Darlington array chip, this board effectively amplifies control signals from Arduino or other microcontrollers, ensuring precise and smooth stepper motor control. It includes LED indicators for easy debugging, making it a preferred choice for hobbyists, DIY enthusiasts, and robotics projects. The board supports direct connection with Arduino and other development platforms, simplifying motor control for automation and embedded systems.
Key Features:
✅ Compatible with 5V-12V stepper motors
✅ Uses ULN2003 Darlington transistor array for signal amplification
✅ Easy connection with Arduino and other microcontrollers
✅ LED indicators for stepper motor status
✅ Compact and lightweight for DIY and robotics applications
You must be logged in to post a review.
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
ULN2003 Stepper Motor
A4988 driver Stepper Motor Driver
L293D Motor-Stepper-Servo Driver Shield for Arduino
Specification
- Supplied Fully Assembled
- 2x 5V Servo outputs connected to the high-resolution dedicated timer - no jitter!
- Can drive 4 DC motors or 2 stepper motors or 2 Servo's
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
- Pull down resistors keep motors disabled during power-up
- reset button
- Tested compatible for Arduino Mega, Diecimila, Duemilanove, Arduino UNO
PWM DC 6V 12V 24V 28V 3A Motor Speed Regulator Control Switch for DC Motors
Specification
| Operating Voltage range | DC6V 28V |
| Operating Current Range | Within 3A |
| Speed range | 0-100% |
| Length (mm) | 65 |
| Width (mm) | 32 |
| Height (mm) | 15 |
| Weight (gm) | 25 |
| Shipment Weight | 0.03 kg |
| Shipment Dimensions | 6 5 3 cm |
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Specification
| Input Supply Voltage (VDC) | 8.2 ~ 42 |
| Current Handling Capacity (A) | 2.2 |
| Continuous Current (A) | 1.5 (per phase) |
| Logic Input (V) | 2.5 ~ 5 |
| Length (mm) | 15 |
| Width (mm) | 20 |
| Weight (gm) | 4 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 4Â Â 4Â 4 cm |
MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Specification
| Arduino Sheild | No- can be used with Wire connection |
| Operating Modes | PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No |
| Continuous Current (A) | 10 |
| Cooling Fan | No |
| Driver Model | MDD10A |
| LED Indicator | Yes |
| No. of Channels | 2 |
| Operating Voltage (VDC) | 5 ~ 25 |
| Peak Current (A) | 30 |
| Polarity Protection | NO |
| Dimensions in mm (LxWxH) | 85 x 62 x 25 |
| Weight (gm) | 40 |
| Others | No heat sink is required |
| Shipment Weight | 0.043 kg |
| Shipment Dimensions | 7 5 3 cm |
4WD Robot Chassis for STEM Projects | 10mm LED & Ultrasonic Sensor Support (Only Chassis Included)
- Lightweight & Durable: 3D-printed design for seamless robotics projects.
- LED Ready: Supports 10mm LEDs for custom lighting.
- Sensor Compatible: Ultrasonic sensor integration for navigation.
- Powerful Motors: Smooth movement with 4 geared DC motors.
- Perfect Fit: Ideal for Arduino, Raspberry Pi, and STEM innovations.
Reviews
There are no reviews yet.