5k Single Turn Potentiometer
₹5.00 Original price was: ₹5.00.₹2.47Current price is: ₹2.47. + GST
L293D Powe rDIP-16 Stepper Motor Controller/Drive
₹50.51 Original price was: ₹50.51.₹15.00Current price is: ₹15.00. + GST
SN74LS47N BCD to 7-Segment Decoder/Driver IC (7447 IC) Package-DIP-16
Rated 4.50 out of 5 based on 2 customer ratings
(2 customer reviews)
₹50.00 Original price was: ₹50.00.₹20.00Current price is: ₹20.00. + GST
7447 or 74LS47 decodes BCD into 7 Segments, which means it accepts a binary coded decimal or BCD Values as input and decoded into a pattern that drives a 7-segment for displaying digits 0 to 9, so its name is BCD to 7 segment driver or decoder. Its input is 4 lines BCD data and generates complements as output. The generation of complement data of BCD is internally so no coding or programming is required to generate it.
67 in stock
SKU:
B-2
Categories: Electronic, IC and Chips
Description
- IC number: 7447
- Applicable for: BCD to 7 Segment converters and displays number from 0 to 9
- Maximum Voltage supply: 5.25V
- Minimum Voltage supply: 4.75V
- Package contains: checked and unused 1 piece of 7447 Ic
- Type: DIP
- Pins: 16
Reviews (2)
2 reviews for SN74LS47N BCD to 7-Segment Decoder/Driver IC (7447 IC) Package-DIP-16
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
Rated 4.48 out of 5
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
HC-05 Bluetooth Module
Rated 5.00 out of 5
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
Voltage Sensor Module
Rated 4.42 out of 5
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
CD4017 Dip16 PIN IC
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
74LS76N Dual Master-Slave J-K Flip-Flop
Rated 5.00 out of 5
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C


















Ayush (verified owner) –
Less cost than other websites
Paaji (verified owner) –
Very well worth the money.