5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
₹400.00 ₹279.62 + GST
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
- Rated 5.00 out of 5
5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse
₹150.00₹88.05 + GST
- Rated 5.00 out of 5
Finger Print Sensor Module – R307
₹1,500.00₹754.40 + GSTAdd to cart
This is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person.
- Rated 4.33 out of 5
MAX7219 8×8 LED Dot Matrix Display Module
₹160.00₹128.30 + GSTAdd to cart
he individual module features 8?8 LED?s, each controlled very precisely by?the MAX7219 driver to generate the color pattern you wish. The great advantage of using this is users will have control over all of the 64 LED by just connecting 3 output communication wires to microcontrollers like Arduino etc.
- Rated 4.50 out of 5
RFID RC522 13.56 MHZ Reader/Writer SPI S50 Card and Keychain
₹140.00₹72.00 + GSTAdd to cart
RFID (radio frequency identification) systems use data strings stored inside RFID tags or transponders) to uniquely identify people or objects when they are scanned by an RFID reader. Because passive tags require a strong RF field to operate, their effective range is limited to an area in close proximity to the RFID reader.
- Rated 4.00 out of 5
L298 Dual Full Bridge Driver
₹110.00₹88.05 + GSTAdd to cart
The?L298?is an integrated monolithic circuit in a 15- lead Multiwatt and Power SO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.