-28%
Portable Radiography Film Viewer 2.5″ × 8″ (200×60 mm) with Film Slider & Foot Switch – LED NDT X-Ray Viewer, Rugged Housing, Power (AC)
Original price was: ₹13,000.00.₹11,500.00Current price is: ₹11,500.00. + GST
74HC595 8-bit Shift Register IC
Original price was: ₹16.80.₹7.00Current price is: ₹7.00. + GST
2N2222 – 40V General Purpose Transistor – NPN – TO-92
Original price was: ₹2.76.₹2.00Current price is: ₹2.00. + GST
2N2222 is NPN BJT?normally used in low power amplifiers and also for switching application.
2n2222 is used as a?small signal transistor?and used as a general purpose transistor and is very popular. ?This is in TO-92 package form.
92 in stock
Description
- NPN Silicon Planar Switching Transistors.
- Switching and Linear application DC and VHF Amplifier applications.
- Rating Symbol Value Unit
- Collector?Emitter Voltage VCEO?: 40 Vdc
- Collector?Base Voltage VCBO?: 75 Vdc
- Emitter?Base Voltage VEBO?: 6.0 Vdc
- Collector Current ? Continuous IC?: 600 mAdc
- Total Device Dissipation(PD) @ TA?= 25?C : 625 mW
- PD?Derate above 25?C : 5.0 mW/?C
- Total Device Dissipation(PD)@ TC?= 25?C : 1.5 Watts
- PD?Derate above 25?C : 12 mW/?C
- Operating and Storage Junction Temperature Range (TJ, Tstg) : ?55 to +150 ?C
- Thermal Resistance, Junction to Ambient RJA?: 200 ?C/W
- Thermal Resistance, Junction to Case RJC?: 83.3 ?C/W
Reviews (23)
23 reviews for 2N2222 – 40V General Purpose Transistor – NPN – TO-92
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Viral (verified owner) –
Online best cost electronic components
Akshay (verified owner) –
Good techinical knowledge
Vikas (verified owner) –
Very fast delivery.
Vikas (verified owner) –
Good service.
Rohit (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Lokesh (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Very well worth the money.
Komal (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Good support and recommended
Rahul (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good support and recommended
Jayen (verified owner) –
Good techinical knowledge
Sneha (verified owner) –
I got my project done with these components Great Support
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
Very fast delivery.
Priya (verified owner) –
Good service.
Harsh (verified owner) –
Best cost electronic components in India
Rahul (verified owner) –
I got my project done with these components Great Support
Komal (verified owner) –
The product is firmly packed.