“ESP-12F ESP8266 WIFI Module” has been added to your cart. View cart

Portable Radiography Film Viewer 2.5″ × 8″ (200×60 mm) with Film Slider & Foot Switch – LED NDT X-Ray Viewer, Rugged Housing, Power (AC)
₹13,000.00 Original price was: ₹13,000.00.₹11,500.00Current price is: ₹11,500.00. + GST

74HC595 8-bit Shift Register IC
₹16.80 Original price was: ₹16.80.₹7.00Current price is: ₹7.00. + GST
2N2222 – 40V General Purpose Transistor – NPN – TO-92
Rated 4.48 out of 5 based on 23 customer ratings
(23 customer reviews)
₹2.76 Original price was: ₹2.76.₹2.00Current price is: ₹2.00. + GST
2N2222 is NPN BJT?normally used in low power amplifiers and also for switching application.
2n2222 is used as a?small signal transistor?and used as a general purpose transistor and is very popular. ?This is in TO-92 package form.
82 in stock
SKU:
B-1
Categories: Electronic, Transistors
Description
- NPN Silicon Planar Switching Transistors.
- Switching and Linear application DC and VHF Amplifier applications.
- Rating Symbol Value Unit
- Collector?Emitter Voltage VCEO?: 40 Vdc
- Collector?Base Voltage VCBO?: 75 Vdc
- Emitter?Base Voltage VEBO?: 6.0 Vdc
- Collector Current ? Continuous IC?: 600 mAdc
- Total Device Dissipation(PD) @ TA?= 25?C : 625 mW
- PD?Derate above 25?C : 5.0 mW/?C
- Total Device Dissipation(PD)@ TC?= 25?C : 1.5 Watts
- PD?Derate above 25?C : 12 mW/?C
- Operating and Storage Junction Temperature Range (TJ, Tstg) : ?55 to +150 ?C
- Thermal Resistance, Junction to Ambient RJA?: 200 ?C/W
- Thermal Resistance, Junction to Case RJC?: 83.3 ?C/W
Reviews (23)
23 reviews for 2N2222 – 40V General Purpose Transistor – NPN – TO-92
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Rated 4.17 out of 5
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
16 X 2 (1602) Yellow (Green) LCD Display
Rated 4.00 out of 5
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
L298N Motor Driver Controller Board
Rated 5.00 out of 5
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
CD4017 Dip16 PIN IC
ESP-12F ESP8266 WIFI Module
Rated 4.55 out of 5
Core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna.
Perfect for use in various electronics projects in India, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module ensures reliability and performance. Ideal for various electronics projects, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module offers quality and performance. 8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
74LS76N Dual Master-Slave J-K Flip-Flop
Rated 5.00 out of 5
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C
Viral (verified owner) –
Online best cost electronic components
Akshay (verified owner) –
Good techinical knowledge
Vikas (verified owner) –
Very fast delivery.
Vikas (verified owner) –
Good service.
Rohit (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Lokesh (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Very well worth the money.
Komal (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Good support and recommended
Rahul (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good support and recommended
Jayen (verified owner) –
Good techinical knowledge
Sneha (verified owner) –
I got my project done with these components Great Support
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
Very fast delivery.
Priya (verified owner) –
Good service.
Harsh (verified owner) –
Best cost electronic components in India
Rahul (verified owner) –
I got my project done with these components Great Support
Komal (verified owner) –
The product is firmly packed.