“1N4148 Zener Diode” has been added to your cart. View cart
DIY River Cleaning Robot Project | WiFi Controlled Boat | NodeMCU Arduino Based Water Cleaning Robot Kit
₹3,200.00 Original price was: ₹3,200.00.₹2,999.00Current price is: ₹2,999.00. + GST
74HC595 8-bit Shift Register IC
₹16.80 Original price was: ₹16.80.₹7.00Current price is: ₹7.00. + GST
2N2222 – 40V General Purpose Transistor – NPN – TO-92
Rated 4.48 out of 5 based on 23 customer ratings
(23 customer reviews)
₹2.76 Original price was: ₹2.76.₹2.00Current price is: ₹2.00. + GST
2N2222 is NPN BJT?normally used in low power amplifiers and also for switching application.
2n2222 is used as a?small signal transistor?and used as a general purpose transistor and is very popular. ?This is in TO-92 package form.
82 in stock
SKU:
B-1
Categories: Electronic, Transistors
Description
- NPN Silicon Planar Switching Transistors.
- Switching and Linear application DC and VHF Amplifier applications.
- Rating Symbol Value Unit
- Collector?Emitter Voltage VCEO?: 40 Vdc
- Collector?Base Voltage VCBO?: 75 Vdc
- Emitter?Base Voltage VEBO?: 6.0 Vdc
- Collector Current ? Continuous IC?: 600 mAdc
- Total Device Dissipation(PD) @ TA?= 25?C : 625 mW
- PD?Derate above 25?C : 5.0 mW/?C
- Total Device Dissipation(PD)@ TC?= 25?C : 1.5 Watts
- PD?Derate above 25?C : 12 mW/?C
- Operating and Storage Junction Temperature Range (TJ, Tstg) : ?55 to +150 ?C
- Thermal Resistance, Junction to Ambient RJA?: 200 ?C/W
- Thermal Resistance, Junction to Case RJC?: 83.3 ?C/W
Reviews (23)
23 reviews for 2N2222 – 40V General Purpose Transistor – NPN – TO-92
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
Rated 4.00 out of 5
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
Crystal Oscillator 16 MHZ
Rated 4.56 out of 5
HC-05 Bluetooth Module
Rated 5.00 out of 5
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
L298N Motor Driver Controller Board
Rated 5.00 out of 5
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Green 10mm LED
Rated 4.50 out of 5
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
Crystal Oscillator 8 MHZ
Rated 4.00 out of 5
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.


















Viral (verified owner) –
Online best cost electronic components
Akshay (verified owner) –
Good techinical knowledge
Vikas (verified owner) –
Very fast delivery.
Vikas (verified owner) –
Good service.
Rohit (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Lokesh (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Very well worth the money.
Komal (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Good support and recommended
Rahul (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good support and recommended
Jayen (verified owner) –
Good techinical knowledge
Sneha (verified owner) –
I got my project done with these components Great Support
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
Very fast delivery.
Priya (verified owner) –
Good service.
Harsh (verified owner) –
Best cost electronic components in India
Rahul (verified owner) –
I got my project done with these components Great Support
Komal (verified owner) –
The product is firmly packed.