DIY Flexible Servo Gripper for Arduino (Starfish Type) | 3D Printed Robotic Claw Kit with SG90 Servo Motor | Any Shape Gripping | STEM Robotics Project – (144)
-
✅ Starfish-Type Flexible Gripper – Print-in-place style claw designed to grip objects of any shape securely
-
✅ Includes SG90 Servo Motor – Ready to assemble with Arduino, Raspberry Pi, or other controllers
-
✅ 3D Printed DIY Kit – Durable PLA parts, easy to mount and integrate into robotic arms and projects
-
✅ Perfect for STEM Learning – Ideal for students, hobbyists, and makers learning robotics & automation
-
✅ Compatible with Arduino & ESP Boards – Simple servo code makes it easy to open/close and test gripping force
How to make it - https://www.instructables.com/Print-in-Place-Robotic-Gripper/
Linear Actuator Lifting Table Hubtisch Diy for Assembly | 3D Printed Scissor Jack Mechanism for MG996R Servo & Similar Motors | DIY Robotics & Automation Project Kit – (143)
3D Printed Micro 105 FPV Quadcopter Frame | Lightweight Body Shell for 8.5mm Motors & Micro Flight Boards – DIY Drone build (Frame Only Electronic Not Included) – (151)
Lightweight 3D printed frame for Micro 105 FPV quadcopter. Designed for 8.5mm motors and Micro Scisky boards. Ideal for DIY drone projects. (Body Only Elecctronics not included)
Note:
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Wall Mount Holder Bracket Compatible with Apple TV 4K (1st to 4th Generation) | Space-Saving Apple TV Mount | Durable & Easy Installation – 099
Generic Portable Portable Charger Holder Compatible with Ola S1 Air, Ola S1 Pro Gen2 & Ola S1X Plus | Wall-Mounted Organizer for Scooter Chargers – 097
DIY WiFi-Controlled Pet Feeder Kit – ESP8266 Smart Dispenser with 3D Printed Parts – (085)
🔹 Contents of the Box:
-
1 × Wemos D1 Mini ESP8266 WiFi Board
-
1 × 28BYJ-48 Stepper Motor
-
1 × ULN2003 Stepper Motor Driver
-
1 × L7805 Voltage Regulator
-
1 × 47uf 25/35V Electrolytic Capacitor
-
10 × F-F Jumper Wires
-
1 × 12V 2A Power Supply Adaptor
- 1x 4x2 General Purpose PCB
-
3D Printed Parts: Spiral screw, Container body, Lid
-
Wiring Diagram and Assembly Instructions
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
DIY Solar Bottle Lamp V2.0 Kit – Upcycled Plastic Bottle Solar Light with 3D Printed Enclosure – (084)
Build your own solar-powered bottle lamp using upcycled materials. Includes 3D printed parts, electronics, and PCB – perfect for sustainable DIY projects.
🔹 Contents of the Box:
-
1 × TP4056 Charging module Type -C
-
2 × 2N2222A Transistor
-
1 × 10MM WHITE LED
-
1 x Resistors: 1KΩ, 10KΩ, 5Ω, 22Ω
-
1 × ON/OFF Rockerz switch
-
1 × Schottky Diode (1N5819)
-
1 × Solar Panel (70x70 mm, 6V)
-
1 × 1200mAH Li-Ion Battery
-
3D Printed Enclosure Parts
-
1 x General Purpose PCB 3x2
-
Assembly Instructions
- How to Make - https://www.instructables.com/DIY-Solar-Bottle-Lamp-V20/
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
DIY Mini Lab Power Supply Kit with XL4015 Buck Converter, Volt-Amp LED Display & Adjustable Voltage Output – (152)
Build your own mini lab power supply with adjustable voltage, LED volt-amp display, and safety features. Perfect for electronics hobbyists and students.
-
1N XL4015 Buck Converter
-
1N Volt-Amp LED Display
-
2 x 10k Precision Potentiometers
-
2 x Binding Posts
-
1N DC Jack (5.5mm x 2.1mm)
-
2 x Rocker Switches
-
1N Fuse Holder
-
1N Fuse
-
1N Heat Sink
-
12 DC Power Supply
How to Make - https://www.instructables.com/DIY-Mini-Lab-Power-Supply/
Note:
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Obstacle Avoiding Dog Robot Kit with 3D Printed Body & Arduino – DIY Pet Robot STEM Project – (068)
What’s in the Box:
-
3D Printed Pet Dog Body (Multiple Pre-Assembled Parts)
-
2x Servo Motor
-
1x Arduino Nano
- 1x Nano Cable
-
1x Ultrasonic Sensor (HC-SR04)
-
1x On/Off Switch
-
10x F-F Jumper Wires
-
9V Battery with connector
- How to make - https://youtu.be/_sOdslAsfBI
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Anti Blast Landmine Project for Indian Army | Inspire Award Project Kit | Science Model | STEM Kit (Assembled, 100% Tested)
- Fully assembledAnti Blast Landmine Project for Indian Army | Inspire Award Project Kit | Science Model | STEM Kit (Assembled, 100% Tested) for quality and reliability.
- Includes complete documentation: circuit diagrams, PCB layout, and testing procedures.
- Instructional videos are available on YouTube for easy understanding.
- Youtube Tutorial Available for Easy Understanding
- 100% support on working days (11 AM – 6 PM). Email: Smartxbrains@gmail.com.
- Fast delivery across India. Perfect for STEM learning, automation projects, and safety-focused electronics.
Obstacle Avoiding Pet Dog Robot Tomy 3D Printed Parts for DIY Projects – 068
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Programmable Automatic Aquarium Fish Feeder 3D Printed Parts for DIY Projects – 089
3D printed parts for a programmable aquarium fish feeder, perfect for DIY automation projects.
Content - 1 N X 3D printed parts for a programmable aquarium fish feeder How to Make - https://www.instructables.com/Programmable-Aquarium-Fish-Feeder-Designed-Granula/
Note:
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.