Nema 17 3D Printer 2-phase 4-wire Stepper Motor for 1.8Deg 17HD34008-22B
Specification
-
-
- Step Angle : 1.8
- Current/Phase : 1.7 Amp
- Resistance/Phase : 1.65 Ohm
- Inductance/Phase : 3.2 mH
- Holding Torque : 4.0 kg.cm
- No. of Leads : 4
- Detent Torque : 150 g.cm
- Rotor Inertia : 54 g.cm
- Mass : 0.28 Kg
- Temperature Rise : 80Cmax
- Ambient Temperature : -20C~+50C
- Insulation Resistance : 100 MO Min.,500VDC
- Dielectric Strength : 500VAC for 1minute
- Shaft Radial Play : 0.02Max. (450g-load)
- Shaft Axial Play : 0.08Max. (450g-load)
- Max. radial force : 28N (20mm from theflange)
- Max. axial force : 10N
- Motor Length : 40(mm)
-
Dual Eye /Bionic robot /Eye Robot Mechanism Animatronics | Simplified Eye Movement Control DIY KIT 3D and Electronic Parts – (077)
DIY animatronic bionic head with moving eyes, eyelids . Includes servo motors. Perfect for robotics learners and engineering students.
Package Includes - 1.Realistic Animatronic Head – 3D parts- 1 Nos 2.SG90 Servo Motor - 6 Nos 3.Nano Shield - 1 Nos 4.Nano Controller - 1 Nos 5.Lithium Battery Holder - 1 Nos 6.Li-ion Battery - 2 Nos 7.Jumper Wires F-F- 10 Nos 8.10K Resistor - 1 Nos 9.10K Pot - 1 Nos 10.Joystick- 1 Nos 11.ON/OFF Switch - 1 Nos How It Work - https://www.instructables.com/Simplified-3D-Printed-Animatronic-Dual-Eye-Mechani/ Note:We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
DIY Robotic Hand Combo Kit – Arduino-Based Smart Hand Project | Wireless Control | STEM Learning Kit – (056)
✅ Key Features:
-
Arduino UNO-based smart robotic hand
-
Realistic movement using MG995 and SG90 servo motors
-
Bluetooth control using HC-05 module
-
Durable 3D printed hand parts (color may vary)
-
Great for engineering projects, robotics workshops, and STEM education
-
Plug-and-play—no soldering required
📦 Kit Includes:
-
1x Arduino UNO SMD Board
-
1x USB Cable for UNO
-
2x MG995 Servo Motors (high torque)
-
1x SG90 Servo Motor (lightweight movement)
-
1x HC-05 Bluetooth Module
-
1x 5V Power Adapter
-
10x Male-to-Female Jumper Wire Set
-
Robotic Hand 3D Printed Parts (Color may vary)
How to Make - https://www.instructables.com/3D-Printed-Robotic-Hand/
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
MG995 (Metal) Gear Servo Motor (180 Rotation)
Features
- The connection cable is thicker.
- Equips high-quality motor.
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
BO Arduino RC Car Chassis Kit – 3D Printed DIY Frame (Electronics & Motor Wheel Not Included) – 061
- Durable 3D Printed Design: Made from high-quality PLA/PETG for strength and longevity.
- Arduino Compatible: Designed to support Arduino-based RC car projects.
- BO Motor Mounts: Pre-cut slots for easy installation of BO motors.
- Easy Assembly: Pre-drilled mounting holes for quick and hassle-free setup.
- Customizable & Expandable: Supports additional sensors and modules.
Gas Sensor Panel Mounted Enclosure For Automation (Sensor not included) – (068)
- Panel Mounted Design: Securely attaches to control panels and enclosures.
- Compatible with Gas Sensors: Fits popular industrial gas sensors.
- 3D Printed Durability: Made from high-quality PETG/PLA for strength and longevity.
- Optimized Ventilation: Designed for accurate gas detection and sensor efficiency.
- Easy Installation: Predefined mounting holes for quick and secure setup
Ardu Nano Board ATmega328P (without solder)
Ultrasonic Sensor Holder Secure Mount for HC-SR04 (*Ultrasonic Sensor And Servo Not Included) – 035
- Material: Durable PLA plastic
- Dimensions: 66x15x42 mm
- Compatibility: Fits standard ultrasonic sensors (e.g., HC-SR04)
- Features: Secure fit, easy installation, ventilation slots
- Ideal For: Robotics, DIY electronics, automation projectsPerfect for electronics projects in India, the Ultrasonic Sensor Holder – Secure Mount for HC-SR04 (*Ultrasonic Sensor and Servo Not Included) – 035 ensures reliable performance and precision. Ideal for various applications in electronics, robotics, and DIY projects.
MG995 Servo Motor Holder- Horizontal- (Servo Motor Not Included) – 011
- Compact design compatible with MG995 Servo Motor.
- Dimensions: L x W x H = 7cm x 2.6cm x 3.7cm.
- Material: PLA+.Perfect for electronics projects, the MG995 Servo Motor Holder - Horizontal (Servo Motor Not Included) - 011 offers high reliability and seamless integration for robotics and automation applications.
3.5mm Stereo Audio Jack Socket
KGF30N60KDA
6 rpm – 12V Centre Shaft DC Geared Motor for robotics
Features
- RPM: 6
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1.2 kg-cm
- No-load current: 60 mA(Max)
- Load current: 300 mA(Max).
- gearbox covered and lubricated with lithium grease
- Requires no maintenance.