SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-Band TTL
Features
- Quad-band 850/900/1800/1900MHz connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8 speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with auto baud detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
- AT command interface with auto baud detection.
- Onboard IPEX socket that can be connected to external antenna.
- Breakouts for external 8W speaker and electret mic if you dont want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL or SMA connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
3D Printed EMG-Controlled Prosthetic Hand Kit | DIY Bionic Hand for Biomedical & Robotics Projects (55)
Build your own EMG-controlled bionic hand! A 3D printed prosthetic hand kit for robotics, biomedical, and college-level STEM projects.
-
3D Printed Parts Set (Palm, Fingers, Joints)
-
5x MG995 Servo Motors
-
1x Arduino UNO Compatible Board
-
1x EMG Muscle Sensor Module (MyoWare or similar)
-
10x M-M Jumper Wires
-
UNO Cable for Arduino
-
Detailed Assembly & Programming Guide (PDF / YouTube)
How to Make – https://www.youtube.com/watch?v=vgtJY_rJWzo&t – Part 1 https://www.youtube.com/watch?v=ZXy0Oxoixcg – Part -
https://www.instructables.com/3D-Printed-EMG-Prosthetic-Hand/ – Complete Assembly
TDA2030A 18W Hi-Fi Audio Power Amplifier IC TO-220-5 Package
Features:-Â
■ Output power 18 W at VS = ±16 V / 4 Ω with 0.5% distortion
â– High output current
â– Very low harmonic and crossover distortion
â– Short-circuit protection
â– Thermal shutdown Perfect for use in various electronics projects in India, TDA2030 18W Hi-Fi Audio Power Amplifier IC TO-220-5 Package ensures reliability and performance. Ideal for various electronics projects, TDA2030 18W Hi-Fi Audio Power Amplifier IC TO-220-5 Package offers quality and performance.
IR Sensor Module Holder- (IR Sensor Not Included) – 007
- Compact and durable IR Sensor Module Holder
- Designed for various electronics projects in India
- Made from PLA material for reliability and performance
- Suitable for automation, robotics, and educational applications
- (IR Sensor Not Included)
- Quality tested before shipping
- Product color may vary from the image
2N60 MOSFET
510 ohm 1/4 Watt Resistor
AC/DC Yellow Panel Indicator 24V
Specification
- High-strength Polycarbonate lampshade material
- Indicator Lamp is anti-interference signal Lamp
- Built-in screw wire is more safe and convenient
- Colour : Yellow
- Input Voltage : 24 Volts AC/DC
- Mounting depth : Approx. 29mm /1.1".
- Size : Fit for 22mm-25mm/0.86"-0.98" diameter mounting hole, Panel Mounted
Heavy Duty 4 Pin 15A/250VAC DPDT ON-OFF Toggle Switch
33 ohm Resister -5 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 33 ohm Resister -5 Watt ensures reliability and performance. Ideal for various electronics projects, 33 ohm Resister -5 Watt offers quality and performance.
18 Pin Dip Ic Socket-Base-Connector Electronic Component
18 Pin IC Socket base adaptor is an 18 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. Perfect for use in various electronics projects in India, 18 Pin Dip Ic Socket-Base-Connector Electronic Component ensures reliability and performance. Ideal for various electronics projects, 18 Pin Dip Ic Socket-Base-Connector Electronic Component offers quality and performance.
8.2k Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 8.2k Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 8.2k Resistor - 2 Watt offers quality and performance.
1K Multiturn Potentiometer
This is a 1K ohm (102) 3296 series?Multiturn trim potentiometer. Multiturn potentiometers are used in application where accuracy and precision is important. As the name suggests the need to turn the know several times for going through the full scale of 0K ohm to 1KOhm.
This?3296 series pucb Mounting multi-turn variable potentiometer?can also be easily mounted on breadboard.