Search Results for: Micro
Showing 33–48 of 143 results
-
MQ2 Flammable Gas and Smoke Sensor Module
Original price was: ₹80.00.₹79.00Current price is: ₹79.00. + GSTAdd to cartSpecifications:-
- Power Supply: 5 Volts
- Interface Type: Analog & Digital
- High Sensitivity to Smoke & combustible gasses like Hydrogen, LPG & Propane.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
-
Otto Mustache Edition Combo Kit ( Note : Product color may vary )(Plastic Parts only)
Original price was: ₹3,000.00.₹1,195.76Current price is: ₹1,195.76. + GSTRead more- Otto is an open-source, 3D printed robot that runs with the help of Arduino. Otto is an interactive Arduino robot and is a perfect learning tool for kids This 3D printed robot kit is an Humanoid MCU robot that has the capability to make sound, walk, dance, gestures, and avoid obstacles. It is programmable with block visual coding or Arduino IDE This DIY Arduino robot kit includes 4 x micro servo motors, a set of screws, Nano ATmega328, USB cable, , ultrasound sensor, buzzer, DuPont easy to connect cables F/F, AA battery case with switch (batteries not included) It uses ultrasound sensor for object detection and is expandable and customizable with 3D printing The Otto robot parts are 3D printed and are manufactured with a social impact mission to create an inclusive environment for all kids
-
Otto Bread Edition Combo Kit
Original price was: ₹3,000.00.₹997.34Current price is: ₹997.34. + GSTRead more- Otto is an open-source, 3D printed robot that runs with the help of Arduino. Otto is an interactive Arduino robot and is a perfect learning tool for kids This 3D printed robot kit is an Humanoid MCU robot that has the capability to make sound, walk, dance, gestures, and avoid obstacles. It is programmable with block visual coding or Arduino IDE This DIY Arduino robot kit includes 4 x micro servo motors, a set of screws, Nano ATmega328, USB cable, , ultrasound sensor, buzzer, DuPont easy to connect cables F/F, AA battery case with switch (batteries not included) It uses ultrasound sensor for object detection and is expandable and customizable with 3D printing The Otto robot parts are 3D printed and are manufactured with a social impact mission to create an inclusive environment for all kids
-
Otto Mustache Edition Combo Kit
Original price was: ₹3,000.00.₹1,017.34Current price is: ₹1,017.34. + GSTRead more- Otto is an open-source, 3D printed robot that runs with the help of Arduino. Otto is an interactive Arduino robot and is a perfect learning tool for kids This 3D printed robot kit is an Humanoid MCU robot that has the capability to make sound, walk, dance, gestures, and avoid obstacles. It is programmable with block visual coding or Arduino IDE This DIY Arduino robot kit includes 4 x micro servo motors, a set of screws, Nano ATmega328, USB cable, , ultrasound sensor, buzzer, DuPont easy to connect cables F/F, AA battery case with switch (batteries not included) It uses ultrasound sensor for object detection and is expandable and customizable with 3D printing The Otto robot parts are 3D printed and are manufactured with a social impact mission to create an inclusive environment for all kids
-
Jumper Wire Set – Male to Female (M2M), Male to Female(M2F), Female to Female(F2F )(40 pcs each)
Original price was: ₹166.00.₹128.31Current price is: ₹128.31. + GSTRead moreApplications:
- Making Temporary Connections using Breadboard
- Used to create junction between Microcontroller and Sensors using breadboard externally.
- Electronic Experiment Prototyping
- Connecting with Berg Strip Headers
-
1uF 100V Electrolytic Capacitor
Original price was: ₹26.00.₹19.50Current price is: ₹19.50. + GSTAdd to cartCapacitance 1 Microfarad Brand Generic Operating Voltage 100 Volts Maximum Voltage 100 Volts -
Arduino UNO R3 Development Board – Compatible Model High Quality
Original price was: ₹800.00.₹487.50Current price is: ₹487.50. + GSTAdd to cart- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
-
2.2UF 400V 225J400V Polyester Film Capacitor
Original price was: ₹10.00.₹5.46Current price is: ₹5.46. + GSTRead moreCapacitance 2.2 Microfarad Brand Generic Material Polyester Operating Voltage 400 Volts Maximum Voltage 400 Volts
-
TSOP1838 METAL 38KHZ IR DISTANCE SENSOR RECEIVER
Original price was: ₹15.00.₹11.05Current price is: ₹11.05. + GSTAdd to cartThe TSOP1838 is a infrared receiver tuned to receive IR of frequency 38 kHz on;y. It is perfect for making obstacle sensors and to read signals from most IR remotes(TV, AC, Home Theatre Remotes, etc). When used as a receiver in distance sensors, it provides better performance as it allows better reception and protection from …
-
HR202 Humidity Detection Sensor Module
Original price was: ₹72.00.₹45.50Current price is: ₹45.50. + GSTAdd to cartUsing high-quality HR202 humidity sensor. The comparator output signal is clean, good waveform, driving ability, more than 15mA The humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity by adjusting the potentiometer, for detecting the humidity can change the threshold ( i.e. the humidity control), such as the need to …
-
ACS712 – 20A Range Current Sensor Module
Original price was: ₹107.00.₹105.00Current price is: ₹105.00. + GSTAdd to cartACS712 Current Sensor Module – 20A can sense upto 20A of current flow. Sensing and controlling the current flow is a fundamental requirement in wide variety of applications, which includes over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. ACS712 Current Sensor Module – 20A is based on …
-
ADS1115 16-Bit I2C ADC 4-Channel Programmable Gain Amplifier Module
Original price was: ₹185.00.₹156.00Current price is: ₹156.00. + GSTAdd to cartFeatures
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- It has an Internal low-drift voltage reference
- Internal Oscillator.
- Internal PGA.
- I2C INTERFACE : Pin-Selectable Addresses.
- Four single ends Or Two differential inputs.
-
2 Channel 5V SSR Solid State Relay Module
Original price was: ₹289.00.₹234.00Current price is: ₹234.00. + GSTAdd to cartFeatures
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
-
5V 2 Channel Relay Module
Original price was: ₹79.00.₹78.00Current price is: ₹78.00. + GSTRead moreFeatures
- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red)
Using 8550 transistor-driven, strong driving ability. - Has the fixed bolt hole and easy installation.
-
5V 10A PCB Mount Sugar Cube Relay – SPDT
Original price was: ₹20.00.₹15.60Current price is: ₹15.60. + GSTAdd to cartAPPLICATIONS:
- Control Solenoids
- Motors
- Bulbs and Lamp
- Home Automation Projects
- Freewheeling diode to protect your microcontroller
-
Piezo Buzzer 35mm
Original price was: ₹23.00.₹13.00Current price is: ₹13.00. + GSTAdd to cartApplications:
- Used in Medical Diagnostics
- Electric lighter
- Microphones.
Features:
- Clear sound
- Ultra-thin and lightweight
- No contacts: therefore, no noise and highly reliable
- Low power consumption for voltage type
- Excellent accessory for acoustic instrument pickups, stompboxes, contact mics, etc.
- Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
- 35mm brass outer diameter plate and ceramic inner diameter plate.
- All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.