9V Battery Connector
This is 9V Battery Connector with a 10 cm cable. It is used to connect a 9V battery to the required application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards as well as many development boards. Perfect for use in various electronics projects in India, 9V Battery Connector ensures reliability and performance. Ideal for various electronics projects, 9V Battery Connector offers quality and performance.
Crystal Oscillator 16 MHZ
NE5534P NE5534 5534 DIP-8 TI Low-Noise Operational Amplifier IC
33 ohm Resistor – 1/4 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 33 ohm Resistor - 1/4 Watt ensures reliability and performance. Ideal for various electronics projects, 33 ohm Resistor - 1/4 Watt offers quality and performance.
HC-05 Bluetooth Module
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
16 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
16 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. Perfect for use in various electronics projects in India, 16 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC's ensures reliability and performance. Ideal for various electronics projects, 16 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC's offers quality and performance.
White LED 10mm Super Bright
A light-emitting diode (LED) is a two-lead semiconductor light source. It is a pn junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor. Perfect for use in various electronics projects in India, White LED 10mm Super Bright ensures reliability and performance. Ideal for various electronics projects, White LED 10mm Super Bright offers quality and performance.
100 RPM Dual Shaft BO Motor-Straight
Specification
- Shaft length: 7 mm
- Motor Design: Straight Dual Shaft
- Shaft Diameter: 5.5 mm
- Size: 55 x 48 x 23 mm.
- Operating Voltage: 3 to 12V.
- Current (without loading): 40-180mA.
- RPM: 100 rpm.
- Output Torque: 0.35 kg cm.
HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor DC 5V
Ultrasonic Distance Sensor provides very short (2CM) to long-range (4M) detection and ranging. The sensor provides precise and stable non-contact distance measurements from about 2cm to 4 meters with very high accuracy. It can be easily interfaced to anyArduino,Raspberry Pior any other micro controller. Perfect for use in various electronics projects in India, HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor DC 5V ensures reliability and performance. Ideal for various electronics projects, HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor DC 5V offers quality and performance.
NO Push Button Contact Element
Specifications of NO Contact Element
- Model : ZB2-BE101
- Rated voltage : 600 VAC
- Rated current : 10 Ampere
- Contacts configuration : SPST - NO (Normally Open)
- Terminals marking : 3 4 NO
- Body color : Black/Green
- Body material : fireproof and impact-resistant plastic
60 rpm – 12V Centre Shaft DC Geared Motor for robotics
DC Motor 60RPM 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly. Perfect for use in various electronics projects in India, 6V - 12V 5 Kg-cm 60 rpm DC Metal Geared Motor ensures reliability and performance. Ideal for various electronics projects, 6V - 12V 5 Kg-cm 60 rpm DC Metal Geared Motor offers quality and performance.
5V 1A Power adapter Supply with 5.5mm DC Plug Adapter
5V 1A Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1.1 meters long connecting a cable. These adapters are designed to meet all types of power requirements of the Arduino board, Raspberry Pi and other electronic gadgets.
This adapter is compatible to handle up to 1A current so applications like toy cars, CCTV Cameras, Routers, Modems, Cordless Phones, Set-Top Boxes, Wireless Devices, and POS Machines are compatible with this adapter. Perfect for use in various electronics projects in India, 5V 1A Power adapter Supply with 5.5mm DC Plug Adapter ensures reliability and performance. Ideal for various electronics projects, 5V 1A Power adapter Supply with 5.5mm DC Plug Adapter offers quality and performance.