Search Results for: Arduino microcontroller
Showing 1–16 of 25 results
-
TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller
Original price was: ₹30.00.₹20.50Current price is: ₹20.50. + GSTAdd to cartThe TSOP1738 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP1738 is compatible with all common IR remote control data formats.
-
Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
Original price was: ₹112.00.₹91.82Current price is: ₹91.82. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5?8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
-
Turbidity Detection Sensor Kit | Liquid Water Particles Value Detection Sensor Module compatible with Arduino
Original price was: ₹1,269.00.₹817.62Current price is: ₹817.62. + GSTAdd to cartSpecifications :-
Working voltage DC 5V Working current 30mA [MAX] Response time <500 msec Insulation Resistance 100M [Min] Operating Temperature (C) -30 ~ +80 Length (mm) 33 Width (mm) 20 Height (mm) 12 Weight (gm) 55 -
DC 3-5V Temperature Sensor Thermocouple Sensor for Arduino
Original price was: ₹70.00.₹54.12Current price is: ₹54.12. + GSTAdd to cartFeatures of KY 028 NTC Temprature Sensor Module
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specifications of?NTC Temprature Sensor Module
- Operating Voltage : 3.3 to 5 Volts
- Output Current : 15 mA
- Output Type : Digital (HIGH OR LOW)
-
Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.₹1,320.77Current price is: ₹1,320.77. + GSTAdd to cartSpecification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
-
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Original price was: ₹80.00.₹61.63Current price is: ₹61.63. + GSTAdd to cartSpecification
Driver IC TM1637 Input Voltage (V) 3.3 to 5.5 Max. Operating Current (mA) 30 Length (mm) 42 Width (mm) 24 Height (mm) 12 Weight (gm) 10 Shipment Weight 0.015 kg Shipment Dimensions 5 ? 3 ? 2 cm -
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.₹41.87Current price is: ₹41.87. + GSTAdd to cartSpecification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,?4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
-
-
1.3 inch Blue OLED Display Module with I2C/IIC Serial Interface for boards compatible with Arduino
Original price was: ₹500.00.₹278.41Current price is: ₹278.41. + GSTRead more- This is small 1.3″ I2C interface OLED 128×64 dot matrix Display module.?This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino or any Microcontroller project. The connection of this display with Arduino is made through I2C interface.
- The SH1106 1.3 Inch 128?64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 3.3 Volts to 5 Volts supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160?
-
Nano CH340 Chip Board without USB cable compatible with Arduino
Original price was: ₹388.00.₹240.50Current price is: ₹240.50. + GSTAdd to cartArduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
-
UNO R3 SMD Board compatible with Arduino | Development Board
Original price was: ₹600.00.₹598.00Current price is: ₹598.00. + GSTAdd to cartArduino UNO R3 SMD is the open source Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller.?Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get.
-
MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
Original price was: ₹2,700.00.₹2,075.50Current price is: ₹2,075.50. + GSTAdd to cartThe Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.
-
LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU
Original price was: ₹40.00.₹28.29Current price is: ₹28.29. + GSTAdd to cartThis?LM393 Photosensitive Light Dependent Sensor Module?is using a high-quality LM393?voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor the?comparator output signal gives a clean and good waveform.
-
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
-
MQ3 Alcohol Gas Sensor Module
Original price was: ₹159.00.₹107.90Current price is: ₹107.90. + GSTAdd to cartSpecification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
-
Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102
Original price was: ₹500.00.₹253.50Current price is: ₹253.50. + GSTRead moreSpecification
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions ? 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
-
ATTINY85V2 Digispark ATTiny85 USB Development Board Digistump Mini
Original price was: ₹400.00.₹210.00Current price is: ₹210.00. + GSTAdd to cartSpecification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source – 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
-