Search Results for: Arduino microcontroller
Showing all 15 results
-
Turbidity Detection Sensor Kit | Liquid Water Particles Value Detection Sensor Module compatible with Arduino
Original price was: ₹1,269.00.₹817.62Current price is: ₹817.62. + GSTAdd to cartSpecifications :-
Working voltage DC 5V Working current 30mA [MAX] Response time <500 msec Insulation Resistance 100M [Min] Operating Temperature (C) -30 ~ +80 Length (mm) 33 Width (mm) 20 Height (mm) 12 Weight (gm) 55 -
Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.₹1,320.77Current price is: ₹1,320.77. + GSTAdd to cartSpecification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
-
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Original price was: ₹80.00.₹61.63Current price is: ₹61.63. + GSTAdd to cartSpecification
Driver IC TM1637 Input Voltage (V) 3.3 to 5.5 Max. Operating Current (mA) 30 Length (mm) 42 Width (mm) 24 Height (mm) 12 Weight (gm) 10 Shipment Weight 0.015 kg Shipment Dimensions 5 ? 3 ? 2 cm -
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.₹41.87Current price is: ₹41.87. + GSTAdd to cartSpecification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,?4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
-
-
Nano CH340 Chip Board without USB cable compatible with Arduino
Original price was: ₹388.00.₹240.50Current price is: ₹240.50. + GSTAdd to cartArduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
-
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
-
MQ3 Alcohol Gas Sensor Module
Original price was: ₹159.00.₹107.90Current price is: ₹107.90. + GSTAdd to cartSpecification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
-
Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102
Original price was: ₹500.00.₹253.50Current price is: ₹253.50. + GSTRead moreSpecification
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions ? 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
-
ATTINY85V2 Digispark ATTiny85 USB Development Board Digistump Mini
Original price was: ₹400.00.₹210.00Current price is: ₹210.00. + GSTAdd to cartSpecification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source – 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
-
-
GY-906 MLX90614ESF Module, MLX90614 Contactless Temperature Sensor Module GY-906
Original price was: ₹2,000.00.₹1,062.91Current price is: ₹1,062.91. + GSTAdd to cartSpecification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
-
-
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module For DIY
Original price was: ₹211.00.₹166.36Current price is: ₹166.36. + GSTAdd to cart- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
-
IRFZ44N MOSFET – 55V 49A N-Channel Power MOSFET TO-220 Package
Original price was: ₹30.00.₹20.12Current price is: ₹20.12. + GSTAdd to cartThe IRFZ44N is known for its high drain current and fast switching speed. Adding to that it also has a low Rds value which will help in increasing the efficiency of switching circuits. The MOSFET will start turning on with a small gate voltage of 4V, but the drain current will be maximum only when a gate voltage of 10V is applied. If the mosfet has to be driven directly from a microcontroller like Arduino then try the logic level version IRLZ44N mosfet.
-
Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz
Original price was: ₹700.00.₹498.00Current price is: ₹498.00. + GSTAdd to cartThis is Pro Mini 5V/16MHz is a 5V Arduino running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.
-
Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module
Original price was: ₹130.00.₹97.00Current price is: ₹97.00. + GSTAdd to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna. -
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Original price was: ₹312.00.₹246.16Current price is: ₹246.16. + GSTAdd to cartSpecification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)