Free Rotating 6 mm Shaft Dead Axle Dummy Motor For Robot Wheel Dummy wheel for robotic vehicle DIY Projects
₹23.01
Good Quality Dummy motor made with Plastic with 6mm shaft diameter.
40 in stock
40 in stock
14 in stock
- 6mm Shaft Diameter
- 2 screw Hole for fixing on cabinet
- Nut for Fixing with Cabinet
- Shaft with 3mm Hole for wheel tightening
1 review for Free Rotating 6 mm Shaft Dead Axle Dummy Motor For Robot Wheel Dummy wheel for robotic vehicle DIY Projects
Related products
- Add to cart
DC Motor – 60RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
- Add to cart
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8Â V to 35Â V and can deliver up to approximately 1Â A per phase without a heat sink or forced air flow (it is rated for 2Â A per coil with sufficient additional cooling).
- Add to cart
DC Motor – 500RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
- Add to cart
- These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gearbox assembly.
- These standard size DC Motors are very easy to use. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The L298N H-bridge module with an onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC.
- This 12V DC Motor – 200RPM can be used in all-terrain robots and a variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
- Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheels.
- These DC Geared motors with robust metal/Plastic gearbox for heavy-duty applications, available in the wide RPM range(Check the list below) and ideally suited for robotics and industrial applications.
Add to cartL293D PowerDIP-16 Stepper Motor Controller/ Driver is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
Shubham (verified owner) –
Online best cost electronic components