Nano CH340 Chip Board without USB cable compatible with Arduino
₹299.00
Arduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
Sold out!
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
1 review for Nano CH340 Chip Board without USB cable compatible with Arduino
You must be logged in to post a review.
Related products
Add to cartThis is 1045(10×4.5) SF Propellers Black. They are for lower RPM motor and slow flying drone models.They have wide and thin blades in their size category which makes them much flexible in crash conditions where they do not break easily. 1045(10×4.5) SF Propellers Black especially draws larger currents and in results will give you a considerable amount of thrust.1045(10×4.5) SF Props have high-quality propellers specially designed for multi-copters. 1045(10×4.5) SF Props has 15° angle design in the end of the propeller to avoid whirlpool multi-copter flying.
- Read more
The Flysky CT6B Remote controller is made of good quality plastic and comes in black colour
This quadcopter remote control has 6 channels and is equipped with 2.4GHz transmitter & receiver
The size of the Flysky transmitter with receiver remote controller is: (l x w x h): 28 cm x 20 cm x 10 cm
The Flysky controller package includes: 1 fly sky remote for quad rotor set (1 fs-ct6b transmitter, 1 fs-r6b receiver, 1 programming cable, 1 bind plug and 1 cd
All the contents in the package are 100% original and are in good working condition. It comes in original packaging condition APM 2.8 Flight Controller
₹2,761.20Read moreThe APM 2.8 Multicopter Flight Controller is a complete open source autopilot system. This is the best selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary-wing. In addition, it turns multirotor vehicle (even cars and boats) into a fully autonomous vehicle. meanwhile, it is capable of performing programmed GPS missions with waypoints.
- Add to cart
- Operating voltage: 7.2V to 12V (2 to 3Li-poly or 6to10 NiCad)
- No load current:0.5Amp
- Maximum current:13Amp for 60Sec
- Maximum Watts:150 Watt
- Weight of motor:50-60 grams
- Maximum operating temperature: + 80°C
- Complete speed control because of three phase connection.
- Long life as there are no moving contacts.
*There are no industrial standard for these brushless motors. Different company devices have slightly different ratings. One should check BLDC motor datasheet for more info on particular model.
Shubham (verified owner) –
Very well worth the money.