Category: Stepper Motors
Stepper Motors
Showing all 3 results
- Add to cart
This is fully programmable 30A BLDC ESC with 5V, 3A BEC. Can drive motors with
continuous 30Amp load current. It has sturdy construction with 2 separate PCBs for
Controller and ESC power MOSFETs. It can be powered with 2-4 lithium Polymer batteries
or 5-12 NiMH / NiCd batteries. It has separate voltage regulator for the microcontroller for
providing good anti-jamming capability. It is most suitable for UAVs, Aircrafts and
Helicopters. - Add to cart
L293D PowerDIP-16 Stepper Motor Controller/ Driver is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
NEMA17 4.2 kg-cm Stepper Motor
₹690.03Add to cartSpecification
- Step Angle : 1.8°
- Current/Phase : 1.7 Amp
- Resistance/Phase : 1.65 Ohm
- Inductance/Phase : 3.2 mH
- Holding Torque : 4.0 kg.cm
- No. of Leads : 4
- Detent Torque : 150 g.cm
- Rotor Inertia : 54 g.cm
- Mass : 0.28 Kg
- Temperature Rise : 80°Cmax
- Ambient Temperature : -20°C~+50°C
- Insulation Resistance : 100 MO Min.,500VDC
- Dielectric Strength : 500VAC for 1minute
- Shaft Radial Play : 0.02Max. (450g-load)
- Shaft Axial Play : 0.08Max. (450g-load)
- Max. radial force : 28N (20mm from the flange)
- Max. axial force : 10N
- Motor Length : 40(mm)