Category: Electronic
Electronic
Showing 529–544 of 680 results
- Add to cartBuy now
MQ135 Gas Sensor module?for Air Quality having Digital as well as Analog output. Sensitive material of?MQ135 gas sensor?is?SnO2,?which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising.?MQ135 gas sensor?has high sensitivity to?Ammonia,?Sulphide?and?Benze steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different application.
MQ3 Alcohol Gas Sensor Module
₹107.90 + GSTAdd to cartBuy nowSpecification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
- Add to cartBuy now
A sensitive material MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases
- Add to cartBuy now
The MT3608 features automatic shifting to pulse ? frequency modulation mode at light loads. The MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent? damage in the event of an output overload.
- Add to cartBuy now
This is? RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.
- Add to cartBuy now
- Ribbon wires or ribbon cables are a package of many conducting wires in parallel to each other in the same flat plane. As the name suggests, all the conducting wires are in a single flat surface or plane resembles a ribbon. Rainbow wire is basically used where outputs are more than one and are together or parallel like, many computer peripherals such as hard drive, CD Drives, etc
Application
- Wired Robot
- Multiple Input-output pins
- As a bus connector
MUR1660 600V 16A Ultrafast Power Diode
₹27.06 + GSTAdd to cartBuy nowThe MUR1660CT 16A, 600V Ultra fast Diodes have a low forward voltage drop and are of planar, silicon nitride passivated, ion-implanted, epitaxial construction. These devices are intended for use as energy steering/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and ultra fast recovery with soft recovery characteristics minimizes ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistor. These state-of-the-art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. The MUR1660CT is designed for use in switching power supplies, inverters and as free wheeling diodes, these state?of?the?art devices have the following features:
? Ultra fast 35 and 60 Nanosecond Recovery Times
? 175?C Operating Junction Temperature
? Popular TO?220 Package
? Epoxy Meets UL94, VO @ 1/8?
? High Temperature Glass Passivated Junction
? High Voltage Capability to 600 Volts
? Low Leakage Specified @ 150?C Case Temperature
? Current Derating @ Both Case and Ambient Temperatures
??Low power loss
??High efficiency Low forward voltage
??Super fast recovery times
Mechanical Characteristics:-
? Case: Epoxy, Molded
? Weight: 1.9 grams (approximately)
? Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
? Lead Temperature for Soldering Purposes: 260?C Max. for 10 Seconds
? Shipped 50 units per plastic tube
? Marking: U1610, U1615, U1620, U1640, U1660
MUR460 – 600V, 4A Ultrafast Power Diode
₹3.28 + GSTAdd to cartBuy nowSpecification:-
Symbol Parameter Value Units VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage 1000 V VRWM VR VRMS RMS Reverse Voltage 700 V IF(AV) Average Forward Output Current (Note 1) @ TC =100?C 1 A IFSM Non-Repetitive Peak Forward Surge Current 8.3ms 45 A Single half sine-wave superimposed on rated load I2 t I2t Rating for Fusing (t < 8.3ms) 8.404 A 2s MUR460 – 600V, 4A Ultrafast Power Diode
₹4.67 + GSTAdd to cartBuy nowSpecification Mounting Style: – Through Hole Vr – Reverse Voltage:-? 600 V If – Forward Current:-? 4 A Type:-? Fast Recovery Rectifiers Vf – Forward Voltage:-? 1.25v Max Surge Current:-? 150 A
NCP1200P60 Switching Controllers 60KHz Current Mode
₹35.22 + GSTAdd to cartBuy nowNCP1200 PWM Current-Mode Controller for Low-Power Universal Off-Line Supplies Housed in SOIC?8 or PDIP?8 package, the NCP1200 represents a major leap to ward ultra?compact Switch mode Power Supplies. Due to a novel concept, the circuit allows the implementation of acomplete offline battery charger or a standby SMPS with few external components
- Add to cartBuy now
Specification Slew Rate – 13v/ us Gain Bandwidth product – 10mhz Current Input Biase -500nA Voltage Input Offset -? 500 uv Current Supply -4 mA Current Output -38mA Voltage Supply Span (min ) -10v Voltage Supply Span ( max ) -30v
Ne555 DC12V Digital Delay Timer | Relay Timer Module Switch | Adjustable 0 To 10 Seconds
₹101.60 + GSTAdd to cartBuy nowSpecifications
- Module Properties : NE555 chip
- Input voltage : DC 12 Volts
- Adjustable time : Within 10 seconds
- Dimension : 77 (L) * 23 (W) * 18 (H) mm (with potentiometer)
- Control voltage : AC 0~250V / max. 10A, DC 0~30V / max. 10A
- Max. loading : 2200W
NEO-6M GPS Module with EPROM
₹215.00 + GSTAdd to cartBuy now- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
?
- Add to cartBuy now
NJM4558 (JRC4558) Dual Operational Amplifier IC
Type of integrated circuit- Operational Amplifier
NRF24L01 2.4GHz Wireless Transceiver Module
₹50.02 + GSTAdd to cartBuy now- Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst?), designed for ultra low power wireless applications.
- The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 – 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
- The embedded baseband protocol engine (Enhanced ShockBurst?) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the system?s MCU. Enhanced ShockBurst? reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
NTC Thermistor 100K Axial Leaded
₹10.06 + GSTAdd to cartBuy nowSpecification
Zero Power Resistance at 25?C 100k ohm Product Range DO-35 Standard Series Thermistor Mounting Through Hole Beta Value (K) 3892K Thermistor Case Style DO-35 Thermistor Terminals Axial Leaded Operating Temperature Min -55?C Operating Temperature Max 300?C Automotive Qualification Standard – RoHS Phthalates Compliant To Be Advised