LM35 Temperature Sensor
Specification
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 0.5C accuracyguarantee(at +25C)
- Rated for full 55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 A current drain
- Low self-heating, 0.08C in still air
- Nonlinearity only14C typical
- Low impedance output, 0.1for 1 mA load
Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY
- A reed switch consists of two ferromagnetic nickel-iron wires and specially shaped contact blades (reeds) positioned in a hermetically sealed glass capsule with a gap between them and in a protective atmosphere. The glass capsule is filled with inert gas to prevent activation of the contacts. The ruthenium or rhodium plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination.
This is a small 14 mm Reed Sensor.
Perfect for use in various electronics projects in India, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY ensures reliability and performance. Ideal for various electronics projects, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY offers quality and performance. 
6.8uf 50V Electrolytic Capacitor
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, 6.8uf 50V Electrolytic Capacitor ensures reliability and performance. Ideal for various electronics projects, 6.8uf 50V Electrolytic Capacitor offers quality and performance.
NTC Thermistor 100K Axial Leaded
Specification
| Zero Power Resistance at 25C | 100k ohm |
| Product Range | DO-35 Standard Series |
| Thermistor Mounting | Through Hole |
| Beta Value (K) | 3892K |
| Thermistor Case Style | DO-35 |
| Thermistor Terminals | Axial Leaded |
| Operating Temperature Min | -55C |
| Operating Temperature Max | 300C |
| Automotive Qualification Standard | - |
| RoHS Phthalates Compliant | To Be Advised |
Viper22A Low Power Off Line SMPS Primary Switcher
Specification
- VDS(sw) Switching Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 730 V
- VDS(st) Start Up Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 400 V
- ID Continuous Drain Current Internally limited A
- VDD Supply Voltage 0 to 45 V
- IFB Feedback Current 3 mA
- Tc Case Operating Temperature -40 to 150 ?C
- Tstg Storage Temperature -55 to 150 ?C
15k ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 15k ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 15k ohm Resistor - 2 Watt offers quality and performance.
USB A to USB B Cable for Arduino UNO/MEGA
Specification
- Fully compatible with the PC.
- Molded strain relief and PVC over molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
18650 2 Cell Battery Holder
HT-12E Encoder Decoder IC
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format.
10A10 10A 1000V Silicon Rectifier Diode
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. Perfect for use in various electronics projects in India, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm ensures reliability and performance. Ideal for various electronics projects, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm offers quality and performance.
