220k Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 220k Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 220k Resistor - 2 Watt offers quality and performance.
LM35 Temperature Sensor
Specification
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 0.5C accuracyguarantee(at +25C)
- Rated for full 55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 A current drain
- Low self-heating, 0.08C in still air
- Nonlinearity only14C typical
- Low impedance output, 0.1for 1 mA load
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. Perfect for use in various electronics projects in India, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm ensures reliability and performance. Ideal for various electronics projects, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm offers quality and performance.
Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY
- A reed switch consists of two ferromagnetic nickel-iron wires and specially shaped contact blades (reeds) positioned in a hermetically sealed glass capsule with a gap between them and in a protective atmosphere. The glass capsule is filled with inert gas to prevent activation of the contacts. The ruthenium or rhodium plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination.
This is a small 14 mm Reed Sensor.
Perfect for use in various electronics projects in India, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY ensures reliability and performance. Ideal for various electronics projects, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY offers quality and performance. 
6.8uf 50V Electrolytic Capacitor
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, 6.8uf 50V Electrolytic Capacitor ensures reliability and performance. Ideal for various electronics projects, 6.8uf 50V Electrolytic Capacitor offers quality and performance.
Viper22A Low Power Off Line SMPS Primary Switcher
Specification
- VDS(sw) Switching Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 730 V
- VDS(st) Start Up Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 400 V
- ID Continuous Drain Current Internally limited A
- VDD Supply Voltage 0 to 45 V
- IFB Feedback Current 3 mA
- Tc Case Operating Temperature -40 to 150 ?C
- Tstg Storage Temperature -55 to 150 ?C
15k ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 15k ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 15k ohm Resistor - 2 Watt offers quality and performance.
3mm Banana Socket Jack for Banana Plug Terminal Connector ( Black )
Features
- Withaluminum alloy core, nickel-plated, and a solid hard plastic shell, the binding post is durable and reliable, have a stable performance.
- Suitable for 4mm banana plugs, spade terminals or a bare wire, easy to install and use.
- Color-coded black/red for maintaining proper polarity.
- Ideal for speaker enclosure applications and amplifier, perfect for connecting center speakers to AV receivers
MQ3 Alcohol Gas Sensor Module
Specification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
HT-12E Encoder Decoder IC
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format.
AP8022 ac-dc off line smps primary switcher ic – dip8
Semiconductor Mobile Charger IC AP8022 Chipown, For Power, Mounting Type: Dip 8
Perfect for use in various electronics projects in India, AP8022 ac-dc off line smps primary switcher ic - dip8 ensures reliability and performance. Ideal for various electronics projects, AP8022 ac-dc off line smps primary switcher ic - dip8 offers quality and performance.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
- ThisTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection isa tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion(Li-Ion) cells such as 16550s that dont have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
- Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
- Manufactured under fully machinery processing. so it has high reliability for the best performance. In conclusion, it is specialdesign for a single lithium battery charging.TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, andtwo status pin to indicate charge termination and the presence of an input voltage.
- Using the module:
- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.