DIY River Cleaning Robot Project | WiFi Controlled Boat | NodeMCU Arduino Based Water Cleaning Robot Kit – (057)
This DIY boat collects floating waste from water bodies using simple controls from your mobile phone.
Perfect for school science projects, college engineering projects, and environmental awareness models. It Include - 1.Node MCU with Programming Cable - 1 Nos 2.Motor Driver - 1 Nos 3.BO Motor - 2 Nos 4.Litium batter with Holder - 2 Nos 5. Connecting Cables 6.Boat Body - 3D Printed part How to make - https://youtu.be/hF1ypZocT6g
DIY Prosthetic Robotic Hand School Project Kit for Kids | Auto Thumb Movement with Servo Motor | 3D Printed Arduino Base Educational Robotics Model DIY KIT – (090)
- 3D Printed Child Hand Model (palm + thumb, size for school project)
- Servo Motor (SG90 or MG90S) – for thumb movement
- Nano – microcontroller , Jumper Wires – 10
- Nano USB power – for assembly How to make -https://youtu.be/yyI0KVxzZIM
Wi-Fi (Mobile) Controlled Robot Tank DIY Kit | NodeMCU ESP8266 Based Smart Robot with 4 BO Motors, Motor Driver & Li-ion Battery | STEM Project Kit for Students & Beginners – (124)
- 🤖 DIY Wi-Fi Controlled Robot Tank – Build your own smart robot using NodeMCU ESP8266! This Wi-Fi robot can be controlled directly from your smartphone via a simple mobile app interface.
📦 Kit Contains:
-
NodeMCU ESP8266 Board – 1 No.
(For Wi-Fi connectivity and control) -
L293D / L298N Motor Driver Module – 1 No.
(Controls direction and speed of motors) -
BO Motors (DC Geared) – 4 Nos.
(Drives the tank wheels smoothly) -
Tank Chassis Base – 1 Set
(Includes 3D printed or durable plastic body) -
Rubber Tracks / Belts – 2 Nos.
(For tank-style movement on any surface) -
Li-ion Battery (Rechargeable) – 2 No.
(Powers the complete setup efficiently) -
Battery Holder with Switch – 1 No.
(Easy ON/OFF power control) -
Connecting Jumper Wires – 10 Nos.
(For module and motor connections)
-
DIY WiFi Controlled Pesticide Spraying Robot Kit for Smart Agriculture | IoT Based Robot using NodeMCU & Arduino – (136)
The robot is powered by a NodeMCU (ESP8266) and can be controlled wirelessly through WiFi. It carries a mini water pump to spray pesticides or water, and runs on four BO motors for mobility.
Perfect for school exhibitions, engineering students, and STEM robotics learning focused on smart agriculture.
🔧 Components Used
-
3D Printed Robot Base
-
NodeMCU (ESP8266) with USB Cable
-
BO Motors – 4 Nos
-
Wheels – 4 Nos
-
Motor Driver Module (L298N / L293D)
-
2-Cell Battery Holder
-
3.7V Li-ion Batteries – 2 Nos
-
Jumper Wires – 10 Nos
-
Mini Water Pump (for spraying mechanism)
-
Power Switch – 2 Nos (Main & Pump Control)
How to Make - https://youtu.be/8F1wvQOBfS8
DIY Autonomous Floor Cleaning Robot Kit (with Ultrasonic Sensor and WiFi Control) – (137)
DIY Autonomous Floor Cleaning Robot Kit | WiFi Controlled Obstacle Avoiding Robot using Ultrasonic Sensor | NodeMCU Smart Robot | STEM Educational Project Kit
Bullet Points (Amazon):
-
🤖 Autonomous Floor Cleaning Robot with Ultrasonic Sensor
-
🌐 NodeMCU Based WiFi Control for Smart Automation
-
⚙️ 3D Printed Base + 4WD Movement
-
🔋 Rechargeable 7.4V Battery Powered
-
🎓 Ideal STEM Robotics Kit for Students & Hobbyists
How to Make it -https://youtu.be/ToZvEzgUBNM
DIY Programmable Aquarium Fish Feeder Kit – Automatic Granular Food Dispenser with Arduino Nano & SG90 Servo – (089)
Contents of the Box:
-
1 × Arduino Nano
-
1 × SG90 9g Micro Servo
-
3D-printed mechanical parts
-
1x Nano USB cable for power
-
1 x 5V Adaptor
- Assembly instructions + Video https://smartxprokits.in/diy-automatic-fish-feeder-with-arduino-without-rtc/ https://youtu.be/B-dExn_CjCA
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
3D Printed Tank Robot Kit with Arduino & BO Motors | DIY STEM Robotics Project – (154)
-
1x 3D Printed Tracked Chassis ( Tracks + PLA Body)
-
2x BO Motors (60 RPM – easy to mount)
-
1x Motor Driver Module (L293D Shield)
-
10x F-F Jumpers
-
1x On-Off Switch
-
Wiring Diagram & Online Video Tutorial Access
- 1x 2 Cell Battery Holder Li-Ion
- 1x Nodemcu CH340
- 2x 1200mah Li-Ion Battery
- How to Make - https://www.instructables.com/Chasis-De-Robot-Con-Orugas-Impresas-En-3D/
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
MG995 Servo Motor Holder For DIY Electronics Projects+MG995 Servo Motor – 011
- Perfectly compatible with MG995 Servo Motor, this PLA+ 3D-printed holder is durable and compact. Dimensions: 7cm x 2.6cm x 3.7cm. Ideal for robotics, automation, and educational projects.
- MG995 Servo Motor Holder Horizontal + MG995 Servo Motor included.
- Crafted from durable PLA+ material for strength and reliability.
- Lightweight, compact design ideal for robotics and automation projects.
- Perfect for educational setups and versatile electronics applications.
- Compatible with MG995 Servo Motor; optimized for various uses.
MG995 Servo Motor Holder For Creative Applications+MG995 Servo Motor – 011
- Perfectly compatible with MG995 Servo Motor, this PLA+ 3D-printed holder is durable and compact. Dimensions: 7cm x 2.6cm x 3.7cm. Ideal for robotics, automation, and educational projects.
- MG995 Servo Motor Holder Horizontal + MG995 Servo Motor included.
- Crafted from durable PLA+ material for strength and reliability.
- Lightweight, compact design ideal for robotics and automation projects.
- Perfect for educational setups and versatile electronics applications.
- Compatible with MG995 Servo Motor; optimized for various uses.
