2 Cell Small Size Battery Holder
3S 25A Lithium Ion BMS For 11.1V Battery
Specifications
- Charging Voltage: 12.6V DC CC/CV
- Balance Voltage for Single Cell: 4.2V
- Max Continuous Charge/Discharge Current: 25A
- Overcharge Detection Voltage: 4.25V
- Overcharge Release Voltage: 4.15V
- Over Discharge Detection Voltage: 2.3V
- Over Discharge Release Voltage: 3.0V
- OverCurrent Detection Current: 35 A
- External Short Circuit Detection
- Automatic Recovery on release of fault condition
1 x 18650 Battery Holder
Features :
- There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
IMAX B6AC Charger/Discharger 1-6 Cells – Clone Model
Specifications:
| Input Voltage (V AC) | 100 ~ 240 |
| DC Input Voltage Range (V) | 11 ~ 18 |
| Charge Current Range (A) | 0.1 ~ 5 |
| Discharge Current Range (A) | 0.1 ~ 1.0 |
| Drain Current for Balancing Li-Po's (mA/Cell) | 300 |
| Li-ion/Po cell count | 1 ~ 6 |
| NiCd/NiMH cell count | 1 ~ 15 Cells |
| Pb battery voltage | 2 ~ 20 |
| Dimensions (mm) LxWxH | 133 x 87 x 33 |
| Weight (gm) | 624 |
| Power | Discharge: 80w(new version) Charge: 10W(new version) |
18650 Lithium Battery 6 X Cell Holder For DIY Electronics Projects (pack of 5) (Battery Not included) – 019
- Custom Design: Tailored for standard 18650 lithium-ion batteries.
- Durable PETG Material: Ensures superior strength, flexibility, and heat resistance.
- Easy to Use: Solderable terminals or slots for secure connections.
- Compact and Lightweight: Ideal for space-constrained designs.
- Wide Compatibility: Suitable for various electronics, robotics, and automation projects.
18650 Lithium Battery 4 X Cell Holder For DIY Electronics Projects (pack of 5) (Battery Not included) -016
- Custom Design: Tailored for standard 18650 lithium-ion batteries.
- Durable PETG Material: Ensures superior strength, flexibility, and heat resistance.
- Easy to Use: Solderable terminals or slots for secure connections.
- Compact and Lightweight: Ideal for space-constrained designs.
- Wide Compatibility: Suitable for various electronics, robotics, and automation projects.
7.4 LIPO Battery Indicator Display Board
Features :
- High reliability, low cost and compact size.
- LED Flash for low charge warning.
- Memory option to recall quantity of electricity.
- Specifically designed to monitor the power level of battery while charging or discharging.
- Provides instant battery status to permit effective management of the charging.
- Display of 4 segment LED bar graph.
- Easy to install and operate.
- Easy to install and operate.
18650 Lithium Battery 3 X Cell Holder For DIY Electronics Projects (pack of 5) (Battery Not included) – 018
- Custom Design: Tailored for standard 18650 lithium-ion batteries.
- Durable PETG Material: Ensures superior strength, flexibility, and heat resistance.
- Easy to Use: Solderable terminals or slots for secure connections.
- Compact and Lightweight: Ideal for space-constrained designs.
- Wide Compatibility: Suitable for various electronics, robotics, and automation projects.
TP4056 (C Type) Charging Module + Panel Mounted Holder – 044
- Perfect Fit: Custom-designed for TP4056 charging module.
- Panel Mount: Easily mounts on panels or enclosures.
- Durable Material: Made from eco-friendly PLA plastic.
- Easy Installation: Quick to install with screws or adhesives (not included).
- Color Varies: Available in multiple colors.
Orange ICR 18650 7.4V 2200mAh Li-Ion Battery Pack – 2S1P with BMS Protection Circuit
1Kg Load cell – Electronic Weighing Scale Sensor
- A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
- This is a standard load cell for measuring weight upto 1 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.