6 rpm – 12V Centre Shaft DC Geared Motor for robotics
Features
- RPM: 6
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1.2 kg-cm
- No-load current: 60 mA(Max)
- Load current: 300 mA(Max).
- gearbox covered and lubricated with lithium grease
- Requires no maintenance.
Perfect for use in various electronics projects in India, CS DC Geared Motor 6 RPM ensures reliability and performance. Ideal for various electronics projects, CS DC Geared Motor 6 RPM offers quality and performance.
Fuse Holder -30mm
12V 40W Ceramic Cartridge Heater
Features :
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so its an easy replacement.
- Small but powerful.
- Get your hot end hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Package Includes :
1 x12v 40W Ceramic Cartridge Heater.
Specifications :-
| Voltage(V) | 12 |
| Power(W) | 40 |
| Lead Length(mm) | 20 |
| Lead Diameter(mm) | 6 |
| Wire Length(cm) | 100 |
| Lead Material | Stainless Steel |
Perfect for use in various electronics projects in India, 12V 40W Ceramic Cartridge Heater ensures reliability and performance. Ideal for various electronics projects, 12V 40W Ceramic Cartridge Heater offers quality and performance.
RED Mushroom Push Button Big Switch (Without Element)
- Color : Red
- Mounting/Thread Diameter : 22 mm
- Button Diameter : 40mm, 4 cm
- Material : Metal and Plastic
- Package Contents : 1 Emergency Push Button Switch
- Switching Element : Not Provided
Perfect for use in various electronics projects in India, RED Mushroom Push Button Big Switch (Without Element) ensures reliability and performance. Ideal for various electronics projects, RED Mushroom Push Button Big Switch (Without Element) offers quality and performance.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Specification
| Input Supply Voltage (VDC) | 8.2 ~ 42 |
| Current Handling Capacity (A) | 2.2 |
| Continuous Current (A) | 1.5 (per phase) |
| Logic Input (V) | 2.5 ~ 5 |
| Length (mm) | 15 |
| Width (mm) | 20 |
| Weight (gm) | 4 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 4 4 4 cm |
Perfect for use in various electronics projects in India, DRV8825 Stepper Motor Driver with Aluminum Heat Sink ensures reliability and performance. Ideal for various electronics projects, DRV8825 Stepper Motor Driver with Aluminum Heat Sink offers quality and performance.
OPTOCOUPLER 4N35025 IC for Replacement or DIY Projects
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers. Perfect for use in various electronics projects in India, OPTOCOUPLER 4N35 IC for Replacement or DIY Projects ensures reliability and performance. Ideal for various electronics projects, OPTOCOUPLER 4N35 IC for Replacement or DIY Projects offers quality and performance.
MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
The Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. Perfect for use in various electronics projects in India, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR ensures reliability and performance. Ideal for various electronics projects, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR offers quality and performance.
Particle Accelerator Demo 3D Printed Parts – DIY Science Project Kit (Electronics Not Included) – 076
3D printed parts for Particle Accelerator Demo Kit, perfect for STEM learning and school science projects.Note* Electronic components not included.
Package Include- 3D printed parts for Particle Accelerator Demo Kit
How to Make- https://www.instructables.com/Particle-Accelerator-Demo/
Note:
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
MG995 Based Door Lock Mechanism (Without Servo Motor)-(033)
✔️ MG995 Servo Motor Powered – Provides strong and reliable locking with precise movement.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
Top mount 16×2 LCD Display Holder for DIY Projects – 049
- Top-Mount Design: Ideal for projects requiring a clear top-facing LCD display.
- Universal Fit: Compatible with all standard 16x2 LCD displays.
- High-Quality Material: Crafted from PLA+, ensuring strength, durability, and eco-friendliness.
- Ease of Use: Pre-drilled holes for easy and quick installation.
- Compact and Lightweight: Suitable for portable and compact setups.
Ardui UNO Case (Note* Ardui Uno Board Not Included) – 038
-
- Perfect Fit: Designed specifically for Arduino Uno boards (74mm x 78mm x 20mm) for a snug fit.
- Durable PLA Construction: Made from robust PLA plastic for long-term durability.
- Color Variety: Choose from various colors to suit your setup.
- Includes Screws: Comes with screws for easy assembly and secure mounting.
- Ventilated Design: Ensures proper airflow to keep your Arduino Uno cool.
Ideal for electronics projects in India, the Arduino UNO Case (*Arduino Uno Board Not Included) – 038 offers protection, durability, and style.
Universal Output DC Adapter Jack (5.5 mm x 2.1 mm) Male PIN Female Socket Panel Mount 12V Power Supply Plug Connectors for Students (Pack of 5)
nan Perfect for use in various electronics projects in India, Universal Output DC Adapter Jack (5.5 mm x 2.1 mm) Male PIN Female Socket Panel Mount 12V Power Supply Plug Connectors for Students (Pack of 5) ensures reliability and performance. Ideal for various electronics projects, Universal Output DC Adapter Jack (5.5 mm x 2.1 mm) Male PIN Female Socket Panel Mount 12V Power Supply Plug Connectors for Students (Pack of 5) offers quality and performance.