Search Results for: microcontroller
Showing 65–80 of 80 results
-
Light Dependent Register- Photo Resistor
Original price was: ₹10.00.₹5.00Current price is: ₹5.00. + GSTAdd to cartThe Light Dependent Resistor (LDR) is just another special type of Resistor and hence has no polarity. Meaning they can be connected in any direction. They are breadboard friendly and can be easily used on a perf board also. The symbol for LDR is just as similar to Resistor but adds to inward arrows as shown above. The arrows indicate the light signals.
-
Magnetic Door Sensor
Original price was: ₹70.00.₹52.00Current price is: ₹52.00. + GSTAdd to cartMC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System can be used as a door or window security system. It produces the signal when moved away from each other which can be fed to the microcontroller to perform the desired action as per requirement.
-
UNO R3 SMD Board compatible with Arduino | Development Board
Original price was: ₹600.00.₹598.00Current price is: ₹598.00. + GSTAdd to cartArduino UNO R3 SMD is the open source Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller.?Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get.
-
MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
Original price was: ₹2,700.00.₹2,075.50Current price is: ₹2,075.50. + GSTAdd to cartThe Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.
-
Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz
Original price was: ₹700.00.₹498.00Current price is: ₹498.00. + GSTAdd to cartThis is Pro Mini 5V/16MHz is a 5V Arduino running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.
-
Finger Print Sensor Module – R307
Original price was: ₹1,500.00.₹832.00Current price is: ₹832.00. + GSTAdd to cartThis is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person.
-
LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU
Original price was: ₹40.00.₹28.29Current price is: ₹28.29. + GSTAdd to cartThis?LM393 Photosensitive Light Dependent Sensor Module?is using a high-quality LM393?voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor the?comparator output signal gives a clean and good waveform.
-
GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module
Original price was: ₹180.00.₹99.00Current price is: ₹99.00.Add to carte MPU6050 is a Micro Electro-Mechanical Systems (MEMS) which consists of a 3-axis Accelerometer and 3-axis Gyroscope inside it. This helps us to measure acceleration, velocity, orientation, displacement and many other motion related parameter of a system or object. This module also has a (DMP) Digital Motion Processor inside it which is powerful enough to perform complex calculation and thus free up the work for Microcontroller.
-
Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module
Original price was: ₹130.00.₹97.00Current price is: ₹97.00. + GSTAdd to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna. -
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
-
Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality)
Original price was: ₹139.00.₹136.50Current price is: ₹136.50. + GSTAdd to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 ? IN4 : relay control ports
-
16 x 2 (JHD162A) Blue/White color DC 5V Character LCD display module FOR ALL TYPE OF DEVLOMENT BOARD
Original price was: ₹200.00.₹96.76Current price is: ₹96.76. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5?8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Blue Backlight
-
ESC 30 amp 30A Brushless Motor Speed Controller RC BEC ESC for Quadcopter Plane Helicopter, Drone Quadcopter Science Project
Original price was: ₹475.54.₹354.24Current price is: ₹354.24. + GSTAdd to cartThis is fully programmable 30A BLDC ESC with 5V, 3A BEC. Can drive motors with
continuous 30Amp load current. It has sturdy construction with 2 separate PCBs for
Controller and ESC power MOSFETs. It can be powered with 2-4 lithium Polymer batteries
or 5-12 NiMH / NiCd batteries. It has separate voltage regulator for the microcontroller for
providing good anti-jamming capability. It is most suitable for UAVs, Aircrafts and
Helicopters. -
Single Channel 5v Relay Module with Isolation High Low Level Trigger
Original price was: ₹40.00.₹39.00Current price is: ₹39.00. + GSTAdd to cartRelays are output devices which are used to control or operate some external devices.? This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side.
-
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Original price was: ₹312.00.₹246.16Current price is: ₹246.16. + GSTAdd to cartSpecification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
-
Quartz Crystal Oscillator 16MHz HC-49S 2 Pin for TV, car Electronics, PC Card, Electronic Watch, DVD, MP3v
Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GSTAdd to cartCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers.
Products
-
PIR Sensor Panel-Mounted Enclosure (*PIR Sensor Not Included) - ID: PIR-PANEL-001
Original price was: ₹68.21.₹53.30Current price is: ₹53.30. + GST
-
Node MCU ESP8266 Panel-Mounted Enclosure (*Node Mcu Not Included)
Original price was: ₹136.32.₹110.50Current price is: ₹110.50. + GST
-
NodeMCU Enclosure (*node mcu not included)
Original price was: ₹135.12.₹117.00Current price is: ₹117.00. + GST
-
Rack and Pinion for MG995 Motor (Rack Length 285mm)
Original price was: ₹165.20.₹156.00Current price is: ₹156.00. + GST
-
20x4 LCD Display Case (*LCD Display Not Included)
Original price was: ₹186.30.₹170.00Current price is: ₹170.00. + GST