AP8022 ac-dc off line smps primary switcher ic – dip8
Semiconductor Mobile Charger IC AP8022 Chipown, For Power, Mounting Type: Dip 8
Perfect for use in various electronics projects in India, AP8022 ac-dc off line smps primary switcher ic - dip8 ensures reliability and performance. Ideal for various electronics projects, AP8022 ac-dc off line smps primary switcher ic - dip8 offers quality and performance.
C2570A Silicon NPN Transistor – Low Noise Amplifier for VHF & UHF Stages
MQ3 Alcohol Gas Sensor Module
Specification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
- ThisTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection isa tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion(Li-Ion) cells such as 16550s that dont have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
- Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
- Manufactured under fully machinery processing. so it has high reliability for the best performance. In conclusion, it is specialdesign for a single lithium battery charging.TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, andtwo status pin to indicate charge termination and the presence of an input voltage.
- Using the module:
- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
840 Points Breadboard with Power Supply
An MB102 840 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Perfect for use in various electronics projects in India, 840 Points Breadboard with Power Supply ensures reliability and performance. Ideal for various electronics projects, 840 Points Breadboard with Power Supply offers quality and performance.
4.7k Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 4.7k Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 4.7k Resistor - 2 Watt offers quality and performance.
3mm Banana Socket Jack for Banana Plug Terminal Connector ( Black )
Features
- Withaluminum alloy core, nickel-plated, and a solid hard plastic shell, the binding post is durable and reliable, have a stable performance.
- Suitable for 4mm banana plugs, spade terminals or a bare wire, easy to install and use.
- Color-coded black/red for maintaining proper polarity.
- Ideal for speaker enclosure applications and amplifier, perfect for connecting center speakers to AV receivers
MG995 (Plastic) Gear Servo Motor (180 Rotation)
Features
- The connection cable is thicker.
- Equips high-quality motor.
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Load Resistor
10 Ohm 100 Ohm Perfect for use in various electronics projects in India, 10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Resistor ensures reliability and performance. Ideal for various electronics projects, 10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Resistor offers quality and performance.
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. Perfect for use in various electronics projects in India, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm ensures reliability and performance. Ideal for various electronics projects, Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm offers quality and performance.
SS34 3A 40V Schottky Diode ? SMA (DO214-AC)
- This is SS34 3A 40V Schottky Diode. This is a SMD version of 1N5822. It has current rating of 3A, with max repetitive voltage of 40V
MUR1660 600V 16A Ultrafast Power Diode
The MUR1660CT 16A, 600V Ultra fast Diodes have a low forward voltage drop and are of planar, silicon nitride passivated, ion-implanted, epitaxial construction. These devices are intended for use as energy steering/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and ultra fast recovery with soft recovery characteristics minimizes ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistor. These state-of-the-art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. The MUR1660CT is designed for use in switching power supplies, inverters and as free wheeling diodes, these state?of?the?art devices have the following features:
? Ultra fast 35 and 60 Nanosecond Recovery Times
? 175?C Operating Junction Temperature
? Popular TO?220 Package
? Epoxy Meets UL94, VO @ 1/8?
? High Temperature Glass Passivated Junction
? High Voltage Capability to 600 Volts
? Low Leakage Specified @ 150?C Case Temperature
? Current Derating @ Both Case and Ambient Temperatures
??Low power loss
??High efficiency Low forward voltage
??Super fast recovery times
Mechanical Characteristics:-
? Case: Epoxy, Molded
? Weight: 1.9 grams (approximately)
? Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
? Lead Temperature for Soldering Purposes: 260?C Max. for 10 Seconds
? Shipped 50 units per plastic tube
? Marking: U1610, U1615, U1620, U1640, U1660