UF4007 Diode
NC Push Button Contact Element
Specifications of NC Contact Element
- Model : ZB2-BE102
- Rated voltage : 600 VAC
- Rated current : 10 Ampere
- Contacts configuration : SPST - NC (Normally Closed)
- Terminals marking : 1 2 NC
- Body color : Black/Red
- Body material : fireproof and impact-resistant plastic
Toy Motor Holder – (062)
LM35 Temperature Sensor
Specification
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 0.5C accuracyguarantee(at +25C)
- Rated for full 55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 A current drain
- Low self-heating, 0.08C in still air
- Nonlinearity only14C typical
- Low impedance output, 0.1for 1 mA load
Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY
- A reed switch consists of two ferromagnetic nickel-iron wires and specially shaped contact blades (reeds) positioned in a hermetically sealed glass capsule with a gap between them and in a protective atmosphere. The glass capsule is filled with inert gas to prevent activation of the contacts. The ruthenium or rhodium plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination.
This is a small 14 mm Reed Sensor.
Perfect for use in various electronics projects in India, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY ensures reliability and performance. Ideal for various electronics projects, Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY offers quality and performance. 
6.8uf 50V Electrolytic Capacitor
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, 6.8uf 50V Electrolytic Capacitor ensures reliability and performance. Ideal for various electronics projects, 6.8uf 50V Electrolytic Capacitor offers quality and performance.
NTC Thermistor 100K Axial Leaded
Specification
| Zero Power Resistance at 25C | 100k ohm |
| Product Range | DO-35 Standard Series |
| Thermistor Mounting | Through Hole |
| Beta Value (K) | 3892K |
| Thermistor Case Style | DO-35 |
| Thermistor Terminals | Axial Leaded |
| Operating Temperature Min | -55C |
| Operating Temperature Max | 300C |
| Automotive Qualification Standard | - |
| RoHS Phthalates Compliant | To Be Advised |
10 rpm – 12V Centre Shaft DC Geared Motor for robotics
Viper22A Low Power Off Line SMPS Primary Switcher
Specification
- VDS(sw) Switching Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 730 V
- VDS(st) Start Up Drain Source Voltage (Tj=25 ... 125?C) -0.3 .. 400 V
- ID Continuous Drain Current Internally limited A
- VDD Supply Voltage 0 to 45 V
- IFB Feedback Current 3 mA
- Tc Case Operating Temperature -40 to 150 ?C
- Tstg Storage Temperature -55 to 150 ?C
15k ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 15k ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 15k ohm Resistor - 2 Watt offers quality and performance.
