-36%
C2570A Silicon NPN Transistor - Low Noise Amplifier for VHF & UHF Stages
Original price was: ₹10.00.₹9.01Current price is: ₹9.01. + GST
L78L12ABUTR STM32 Linear Voltage Regulator, Fixed 12V Output, 100mA, SOT-89-3 Package – 19V Input for Electronics Projects
Original price was: ₹11.00.₹8.00Current price is: ₹8.00. + GST
Orange ICR 18650 7.4V 2200mAh Li-Ion Battery Pack – 2S1P with BMS Protection Circuit
Original price was: ₹1,549.00.₹999.00Current price is: ₹999.00. + GST
The Orange ICR 18650 7.4V 2200mAh Li-Ion Battery Pack delivers high energy density, long-lasting performance, and built-in BMS protection for up to 500 charge cycles.
2 in stock
Description
he Orange ICR 18650 7.4V 2200mAh Li-Ion Battery Pack is designed for high-performance applications requiring reliable, long-lasting power. With a 2S1P configuration, this battery provides an optimal 7.4V output and a capacity of 2200mAh. Known for its high energy density, the battery delivers consistent performance with low self-discharge, making it ideal for power-hungry devices. Equipped with a Battery Management System (BMS), it ensures safe operation and prolongs battery life, offering up to 500 charge cycles. Whether you’re working with robotics, drones, or other electronics, this battery pack is the perfect power solution
Reviews (0)
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
9V Zinc Chloride Battery
This is General purpose 9V Original HW marked Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this battery in our testing lab for various purpose, we can assure you the best quality, long life and genuineness of this battery among all options available in the market at this cost. Perfect for use in various electronics projects in India, HW 6f22 29312 Hw Long Life Zinc Carbon Battery, Hi-watt, 9v ensures reliability and performance. Ideal for various electronics projects, HW 6f22 29312 Hw Long Life Zinc Carbon Battery, Hi-watt, 9v offers quality and performance.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
- ThisTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection isa tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion(Li-Ion) cells such as 16550s that dont have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
- Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
- Manufactured under fully machinery processing. so it has high reliability for the best performance. In conclusion, it is specialdesign for a single lithium battery charging.TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, andtwo status pin to indicate charge termination and the presence of an input voltage.
- Using the module:
- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
Battery snap connector
Features :
- Excellent material
- Fine workmanship
- It is an environmental 9V battery buckle
- T- Fonts, with red and black connecting lines
- Save Power and Protect the environment
- Good electrical conductivity and comfortable sense of touch
IMAX B6AC Charger/Discharger 1-6 Cells – Clone Model
Specifications:
| Input Voltage (V AC) | 100 ~ 240 |
| DC Input Voltage Range (V) | 11 ~ 18 |
| Charge Current Range (A) | 0.1 ~ 5 |
| Discharge Current Range (A) | 0.1 ~ 1.0 |
| Drain Current for Balancing Li-Po's (mA/Cell) | 300 |
| Li-ion/Po cell count | 1 ~ 6 |
| NiCd/NiMH cell count | 1 ~ 15 Cells |
| Pb battery voltage | 2 ~ 20 |
| Dimensions (mm) LxWxH | 133 x 87 x 33 |
| Weight (gm) | 624 |
| Power | Discharge: 80w(new version) Charge: 10W(new version) |
1Kg Load cell – Electronic Weighing Scale Sensor
- A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
- This is a standard load cell for measuring weight upto 1 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
Reviews
There are no reviews yet.