-41%
Rain Water Level Sensor Module Detection Liquid Surface Depth Height
Original price was: ₹40.00.₹22.96Current price is: ₹22.96. + GST
Multicolor Ribbon Cable 10 Core DuPont Rainbow Wire - 1 meter
Original price was: ₹50.00.₹40.00Current price is: ₹40.00. + GST
NEO-6M GPS Module with EPROM
Original price was: ₹399.00.₹234.00Current price is: ₹234.00. + GST
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
Perfect for use in various electronics projects in India, NEO-6M GPS Module with EPROM ensures reliability and performance. Ideal for various electronics projects, NEO-6M GPS Module with EPROM offers quality and performance.
9 in stock
Description
- specification
- Model Ublox NEO-6M
- Receiver Type 2.7 ~ 6
- Main Chip NEO-6
- Sensitivity (dBm)Â -160
156
Cold Start (without aiding): -147 dBm
Tracking & Navigation: -161 dBm - Navigation Update Rate   5Hz
- Position Accuracy (Meter)
- Operating Temperature Range (C) -24 to 84
- Tracking Sensitivity (dBm) –Â Â -161 dBm
- Avg Cold Start Time (s) –Â 27
- Warm Start Time (s) 27
- Maximum Speed 500 M/s
- Dimensions (mm) LxWxH Antenna  25 x 7
- GPS Board 22 x 30 x 4
- Weight (gm) 12
- Cable Length (cm)Â 10
- Shipment Weight 0.025 kg
- Shipment Dimensions 8Â Â 6Â Â 4 cm
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: NEO-6M GPS Module with EPROM, electronic components India, NEO-6M GPS Module with EPROM buy online, electronic supplies India, NEO-6M GPS Module with EPROM price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: NEO-6M GPS Module with EPROM, buy NEO-6M GPS Module with EPROM online, electronics components, NEO-6M GPS Module with EPROM features, NEO-6M GPS Module with EPROM applications, high quality NEO-6M GPS Module with EPROM
Reviews (8)
8 reviews for NEO-6M GPS Module with EPROM
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
1N4007 diode
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability. Perfect for use in various electronics projects in India, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant ensures reliability and performance. Ideal for various electronics projects, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
FR107 Diode
High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Perfect for use in various electronics projects in India, FR107 - 700V , 1A Diode ensures reliability and performance. Ideal for various electronics projects, FR107 - 700V , 1A Diode offers quality and performance.
Green 10mm LED
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Komal (verified owner) –
Good support and recommended
Paaji (verified owner) –
Good support and recommended
Er.Prashant (verified owner) –
Best Science project
Shubham (verified owner) –
Good Stem kit
Vivek (verified owner) –
Online best cost electronic components
Rohit (verified owner) –
Good Kit
Zohar (verified owner) –
Good support and recommended
Akshay (verified owner) –
Good techinical knowledge