Hall Effect Sensor
Original price was: ₹40.00.₹13.20Current price is: ₹13.20. + GST
12 in stock
12 in stock
10 in stock
12 in stock
53 in stock
26 in stock
128 in stock
120 in stock
51 in stock
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH (3.5 V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up.?An onboard LED will also indicate the presence of a magnetic field.
You must be logged in to post a review.
Related products
-
PZIN51000071 Imported Heart Rate Pulse Sensor Module
Original price was: ₹170.00.₹85.00Current price is: ₹85.00. + GSTAdd to cartThe working of the Pulse/Heart beat sensor is very simple. The sensor has two sides, on one side the LED is placed along with an ambient light sensor and on the other side we have some circuitry. This circuitry is responsible for the amplification and noise cancellation work. The LED on the front side of the sensor is placed over a vein in our human body. This can either be your Finger tip or you ear tips, but it should be placed directly on top of a vein.
-
Digital Magnetic Reed Switch Sensor SPST 2 Pins NO for DIY
Original price was: ₹20.00.₹14.27Current price is: ₹14.27. + GSTAdd to cart- A reed switch consists of two ferromagnetic nickel-iron wires and specially shaped contact blades (reeds) positioned in a hermetically sealed glass capsule with a gap between them and in a protective atmosphere. The glass capsule is filled with inert gas to prevent activation of the contacts. The ruthenium or rhodium plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination.
This is a small 14 mm Reed Sensor. -
BMP280 3.3 Digital Barometric Pressure Altitude Sensor High Precision Atmospheric Module Replace BMP180
Original price was: ₹65.00.₹37.74Current price is: ₹37.74. + GSTAdd to cartSpecification
Operating voltage (v) 1.71 ~ 3.6 Peak current 1.12mA Operating Pressure 300 hPa ~ 1100 hPa. Operating Temperature -40 ~ +85 °C Length (mm) 15 Width (mm) 12 Height (mm) 2 Weight (gm) 2 Shipment Weight 0.005 kg Shipment Dimensions 9 ? 7 ? 5 cm -
HC-SR501 PIR Sensor Infrared IR Body Motion Module
Original price was: ₹95.00.₹59.04Current price is: ₹59.04. + GSTAdd to cartPIR Sensor is also called as Motion Sensor or Movement Sensor or is basically a Passive Infrared Sensor.
It is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. It detect the ?motion by detecting the changes in the IR levels emitted from the object.It can be used as motion detector for security systems or robotics.
-
30A Range Electrical Parts Current Sensor Module ACS712 for Arduino
Original price was: ₹140.00.₹105.60Current price is: ₹105.60. + GSTAdd to cartThe 30A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage.
Reviews
There are no reviews yet.