You searched for Arduino microcontroller

Search Results for: Arduino microcontroller

Showing 1–16 of 37 results

Sale!
Rated 4.00 out of 5
TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller
Original price was: ₹30.00.Current price is: ₹20.50. + GST

The TSOP1738 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP1738 is compatible with all common IR remote control data formats.

Add to cart

Quick View
Sale!
Rated 4.00 out of 5
Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
Original price was: ₹112.00.Current price is: ₹91.82. + GST
Operating Voltage is 4.7V to 5.3V

Current consumption is 1mA without backlight

Alphanumeric LCD display module, meaning can display alphabets and numbers

Consists of two rows and each row can print 16 characters.

Each character is build by a 5?8 pixel box

Can work on both 8-bit and 4-bit mode

It can also display any custom generated characters

Available in Green Backlight
Add to cart

Quick View
Sale!
Arduino UNO R3 Development Board – Compatible Model High Quality
Original price was: ₹800.00.Current price is: ₹487.50. + GST
Microcontroller: ATmega328P.

Operating Voltage: 5V.

Input Voltage: 7-12V.

Digital I/O Pins: 14 (of which 6 provide PWM output).

Analog Input Pins: 6.

DC Current: 40mA.

Flash Memory: 32 KB.

SRAM: 2 KB.

EEPROM: 1 KB.

Clock Speed: 16 MHz.
Add to cart

Quick View

Sale!

Rated 5.00 out of 5

Turbidity Detection Sensor Kit | Liquid Water Particles Value Detection Sensor Module compatible with Arduino

+ GST

Specifications :-

Working voltage	DC 5V
Working current	30mA [MAX]
Response time	<500 msec
Insulation Resistance	100M [Min]
Operating Temperature (C)	-30 ~ +80
Length (mm)	33
Width (mm)	20
Height (mm)	12
Weight (gm)	55

Add to cart

Quick View

Sale!
Rated 4.43 out of 5
DC 3-5V Temperature Sensor Thermocouple Sensor for Arduino
Original price was: ₹70.00.Current price is: ₹54.12. + GST
Features of KY 028 NTC Temprature Sensor Module

NTC Thermistor sensor

LM393 voltage comparator

Mounting hole for easy installation

Adjustable threshold via potentiometer

Specifications of?NTC Temprature Sensor Module

Operating Voltage : 3.3 to 5 Volts

Output Current : 15 mA

Output Type : Digital (HIGH OR LOW)
Add to cart

Quick View
Sale!
Rated 4.58 out of 5
Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.Current price is: ₹1,320.77. + GST
Specification

Microcontroller : ATmega 2560

USB-TTL converter : CH340g

Power Out : 5 Volt – 800mA

Power IN. : 5 Volt

Power IN. VIN/DC Jack : 5 Volt

Power Consumption :?5 Volt,? 220mA

Logic Level : 5 Volt

USB : Micro USB

Clock Frequency : 16MHz

Operating Supply Voltage : 5 Volt

Digital I/O?: 54

Analog I/O : 16

Memory Size : 256kb

Data RAM Type/Size : 8Kb

Data ROM Type/Size : 4Kb

Interface Type : ISP

Operating temperature : ?40??/+85??
Add to cart

Quick View

Sale!

Rated 4.57 out of 5

TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino

+ GST

Specification

Driver IC	TM1637
Input Voltage (V)	3.3 to 5.5
Max. Operating Current (mA)	30
Length (mm)	42
Width (mm)	24
Height (mm)	12
Weight (gm)	10
Shipment Weight	0.015 kg
Shipment Dimensions	5 ? 3 ? 2 cm

Add to cart

Quick View

Sale!
Rated 5.00 out of 5
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.Current price is: ₹41.87. + GST
Specification

Ultra-thin design & adhesive backing provides easy integration to any project

Excellent price-performance ratio

Easy communication with any microcontroller

5 pins 2.54mm pitch connector,?4x 4type 16 keys.

The sticker can peel off for adhesive mounting.

Used widely in industrial and home electronic equipment, instrument, etc.

This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
Add to cart

Quick View
Sold out!
Rated 4.46 out of 5
1.3 inch Blue OLED Display Module with I2C/IIC Serial Interface for boards compatible with Arduino
Original price was: ₹500.00.Current price is: ₹278.41. + GST
This is small 1.3″ I2C interface OLED 128×64 dot matrix Display module.?This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino or any Microcontroller project. The connection of this display with Arduino is made through I2C interface.

The SH1106 1.3 Inch 128?64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 3.3 Volts to 5 Volts supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160?
Read more

Quick View
Sale!
Rated 5.00 out of 5
Nano CH340 Chip Board without USB cable compatible with Arduino
Original price was: ₹388.00.Current price is: ₹240.50. + GST

Arduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.

Add to cart

Quick View
Sale!
Rated 4.25 out of 5
UNO R3 SMD Board compatible with Arduino | Development Board
Original price was: ₹600.00.Current price is: ₹598.00. + GST

Arduino UNO R3 SMD is the open source Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller.?Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get.

Add to cart

Quick View
Sale!
Rated 4.46 out of 5
MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
Original price was: ₹2,700.00.Current price is: ₹2,075.50. + GST

The Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

Add to cart

Quick View
Sale!
Rated 4.00 out of 5
LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU
Original price was: ₹40.00.Current price is: ₹28.29. + GST

This?LM393 Photosensitive Light Dependent Sensor Module?is using a high-quality LM393?voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor the?comparator output signal gives a clean and good waveform.

Add to cart

Quick View
Sale!
Rated 4.67 out of 5
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
Original price was: ₹120.00.Current price is: ₹65.00. + GST

The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.

Add to cart

Quick View
Sale!
2 Channel 5V SSR Solid State Relay Module
Original price was: ₹289.00.Current price is: ₹234.00. + GST
Features

2 channel 2 AMP Solid State Relay board

Control 2 loads of up to 2 amps each at 120V or 240V AC.

Good for lighting, holiday displays etc.

Has been assembled, and the electrical test passed.

Led indicator for each relay.
Add to cart

Quick View
Sale!
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
Original price was: ₹290.00.Current price is: ₹280.00. + GST
Microcontroller: The board is powered by the ATmega168PA microcontroller chip, which operates at 5V voltage and has a clock speed of 16MHz. This microcontroller offers a good balance of processing power and energy efficiency for a wide range of tasks.

Improved Design: This version of the Pro Mini features enhancements over previous iterations, potentially including improvements in power efficiency, stability, and overall performance. These enhancements make it more reliable and efficient for use in diverse projects.

Compact Form Factor: The Pro Mini module is designed to be compact and lightweight, making it suitable for applications where space is limited. Its small size allows for easy integration into various projects and enclosures.

On-Board Components: The module comes with essential on-board components, including voltage regulator, crystal oscillator, reset button, and indicator LEDs. These components simplify the setup process and provide convenient debugging options.

Easy Programming: The board can be easily programmed using a USB-to-serial adapter or an FTDI breakout board. It is compatible with the Arduino IDE, allowing users to write and upload code effortlessly for their projects.

Versatile Connectivity: The Pro Mini features a standard 6-pin header for serial communication (TX, RX, GND), as well as digital I/O pins for connecting sensors, actuators, displays, and other peripherals. It also has analog input pins for reading sensor data.

Low Power Consumption: With its optimized design and power-efficient components, the Pro Mini module is capable of operating on low power, making it suitable for battery-powered applications and energy-conscious projects.
Add to cart

Quick View