-38%
L293D Powe rDIP-16 Stepper Motor Controller/Drive
Original price was: ₹50.51.₹15.00Current price is: ₹15.00. + GST
Multicolor ID Name Keyrings & Keychains Key Tags with Label
Original price was: ₹30.00.₹12.15Current price is: ₹12.15. + GST
HT-12E Encoder Decoder IC
Original price was: ₹89.00.₹55.00Current price is: ₹55.00. + GST
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format.
24 in stock
Description
- Operating voltage 2.4V~12V.
- Low power and high noise immunity CMOS technology.
- Low standby current: 0.1A (typ.) at VDD=5V.
- Data code has positive polarity.
- HT12A with a 38kHz carrier for infrared transmission medium.
- Minimum transmission word Four words for the HT12E.
- Built-in oscillator needs only 5% resistor.
- Minimal external components.
Reviews (1)
1 review for HT-12E Encoder Decoder IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
1N4148 Zener Diode
It is one of the most popular and long lived switching diodes because of its dependable specifications and low cost. The 1N4148 is useful in switching applications up to about 100 MHz. The 1N4148 comes in a DO-35 glass package for thru-hole mounting. Perfect for use in various electronics projects in India, 1N4148 -100V ,450mA | Diode Small Signal ensures reliability and performance. Ideal for various electronics projects, 1N4148 -100V ,450mA | Diode Small Signal offers quality and performance.
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
5V 1 Channel Solid State Relay Board
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Priya (verified owner) –
Very well worth the money.