8 Channel Isolated 12V Relay Module opto coupler For Arduino PIC AVR DSP ARM
Original price was: ₹410.00.₹305.00Current price is: ₹305.00.
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Perfect for use in various electronics projects in India, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry ensures reliability and performance. Ideal for various electronics projects, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry offers quality and performance.
6 in stock
- These are optically isolated relay modules having 12 Volt cube Relays. The relays in the 8 channel 5 volt isolated relay module are driven by a Opto-coupler which provides isolation between your Micro-controller, Arduino or Raspberry Pi & the relay thus making this module better that the modules having transistor or ULN2003 IC as drivers.
- This8 channel 5 volts isolated Relay Modulehas output relay contacts of 10 ampere at 250 volts. You can use it easily with any Micro-controller, Arduino or Single Board Computers (SBC) like Raspberry Pi and Beagle bone. You can even use this module with digital IC’s like LM555 or HT12D.
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry, electronic components India, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry buy online, electronic supplies India, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry, buy 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry online, electronics components, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry features, 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry applications, high quality 8 Channel 12V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
7 reviews for 8 Channel Isolated 12V Relay Module opto coupler For Arduino PIC AVR DSP ARM
You must be logged in to post a review.
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
FR107 Diode
High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Perfect for use in various electronics projects in India, FR107 - 700V , 1A Diode ensures reliability and performance. Ideal for various electronics projects, FR107 - 700V , 1A Diode offers quality and performance.
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
16 x 2 (1602) Character Blue LCD Display
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Blue Backlight
Perfect for use in various electronics projects in India, 16 x 2 (JHD162A) Blue/White color DC 5V Character LCD display module FOR ALL TYPE OF DEVLOMENT BOARD ensures reliability and performance. Ideal for various electronics projects, 16 x 2 (JHD162A) Blue/White color DC 5V Character LCD display module FOR ALL TYPE OF DEVLOMENT BOARD offers quality and performance.
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
5V 1 Channel Solid State Relay Board
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
Er.Prashant (verified owner) –
Good techinical knowledge
Sneha (verified owner) –
Good quality.
Harsh (verified owner) –
Very well worth the money.
Lokesh (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Good support and recommended
Devendra (verified owner) –
I got my project done with these components Great Support
Akshay (verified owner) –
Very well worth the money.