-55%
Portable Radiography Film Viewer 2.5″ × 8″ (200×60 mm) with Film Slider & Foot Switch – LED NDT X-Ray Viewer, Rugged Housing, Power (AC)
Original price was: ₹13,000.00.₹11,500.00Current price is: ₹11,500.00. + GST
74HC595 8-bit Shift Register IC
Original price was: ₹16.80.₹7.00Current price is: ₹7.00. + GST
Crystal Oscillator 8 MHZ
Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GST
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC’s which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
15 in stock
Description
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency : ?8 MHz
- Frequency Stability : ? 50ppm
- Frequency Tolerance : ? 30ppm
- Load Capacitance : 10 pF
- of Pins : 2
- Operating Temperature Max : 70 ?C
- Operating Temperature Min : -10 ?C
- Operating Temperature Range : -10?C to +70?C
Reviews (1)
1 review for Crystal Oscillator 8 MHZ
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC548 NPN 30V 0. 1A Transistor High quality
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
- This 3 Volt 5mW 650nm Laser Diodeis a fun little red laser that emits a laser beam similar to a laser pointer when given 3 Volts of power just like you'd get from two standard AAA or AA batteries.
16 x 2 (1602) Character Blue LCD Display
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Blue Backlight
Green 10mm LED
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Jayen (verified owner) –
Good service.