68pf/ 50V ceramic Capacitor
Original price was: ₹1.22.₹1.02Current price is: ₹1.02. + GST
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor offers quality and performance.
100 in stock
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor, electronic components India, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor buy online, electronic supplies India, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor, buy 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor online, electronics components, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor features, 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor applications, high quality 0.000068uf/0.068nf/68pf/ 50V ceramic Capacitor
23 reviews for 68pf/ 50V ceramic Capacitor
You must be logged in to post a review.
Related products
-
5V Single Channel Relay Module
Original price was: ₹40.00.₹39.00Current price is: ₹39.00. + GSTAdd to cartRelays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
-
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Original price was: ₹312.00.₹246.16Current price is: ₹246.16. + GSTAdd to cartSpecification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Perfect for use in various electronics projects in India, 8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry ensures reliability and performance. Ideal for various electronics projects, 8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry offers quality and performance.
-
Voltage Sensor Module
Original price was: ₹16.00.₹15.08Current price is: ₹15.08. + GSTAdd to cartThis DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
-
Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality)
Original price was: ₹139.00.₹136.50Current price is: ₹136.50. + GSTAdd to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 IN4 : relay control ports
Perfect for use in various electronics projects in India, Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality) ensures reliability and performance. Ideal for various electronics projects, Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality) offers quality and performance.
-
BC547 NPN General Purpose Transistor
Original price was: ₹5.00.₹1.17Current price is: ₹1.17. + GSTRead moreBC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
Sneha (verified owner) –
Online best cost electronic components
Shubham (verified owner) –
Very fast delivery.
Shubham (verified owner) –
Good service.
Priya (verified owner) –
Good support and recommended
Vikas (verified owner) –
The product is firmly packed.
Komal (verified owner) –
The product is firmly packed.
Rahul (verified owner) –
Very well worth the money.
Lokesh (verified owner) –
Good techinical knowledge
Rahul (verified owner) –
I got my project done with these components Great Support
Ayush (verified owner) –
Drone parts i ordered and found ok
Vikas (verified owner) –
Good service.
Priya (verified owner) –
Less cost than other websites
Shubham (verified owner) –
Good quality.
Vikas (verified owner) –
Less cost than other websites
Rahul (verified owner) –
I got my project done with these components Great Support
Mayur (verified owner) –
Good techinical knowledge
Sneha (verified owner) –
Good support and recommended
Rohit (verified owner) –
Very fast delivery.
Vikas (verified owner) –
Good quality.
Priya (verified owner) –
Good techinical knowledge
Priya (verified owner) –
Good service.
Rahul (verified owner) –
Good techinical knowledge
Shubham (verified owner) –
Less cost than other websites