4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino
Original price was: ₹70.00.₹60.00Current price is: ₹60.00.
Features:
- 44 Matrix Keyboard Module with 16 buttons
- Small in size and henceSave space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
Perfect for use in various electronics projects in India, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino ensures reliability and performance. Ideal for various electronics projects, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino offers quality and performance.
6 in stock
- The 4 x 4 matrix keypad usually is used as input in a project. It has 16 keys in total, which means the same input values. The 4 x 4 Matrix Keypad Module is a non-encoded matrix keypad consisting of 16 keys in parallel. The keys of each row and column are connected through the pins outside pin R1-R4 as labeled beside control the rows, when L1-L4, the columns.
- A 44 matrix keypad consisting of microswitch buttons. The module has four holes 3mm (M3) holes for mounting. The pin designations on each PCB are shown on each PCB. Four pins are thus used as an x coordinate and the other 4 as a y coordinate.
The module is already equipped with a soldered pin-headers.
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino, electronic components India, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino buy online, electronic supplies India, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino, buy 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino online, electronics components, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino features, 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino applications, high quality 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino
19 reviews for 4×4 Keypad MCU Boar Matrix Array Switch Tactile Keypad 16 Button for Arduino
You must be logged in to post a review.
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
3.7V 1200 mAh 18650 Lithium Rechargeable Battery
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications. Perfect for use in various electronics projects in India, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery ensures reliability and performance. Ideal for various electronics projects, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
HC-05 Bluetooth Module
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
ESP-12F ESP8266 WIFI Module
Perfect for use in various electronics projects in India, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module ensures reliability and performance. Ideal for various electronics projects, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module offers quality and performance.
Roma (verified owner) –
Online best cost electronic components
Viral (verified owner) –
Good techinical knowledge
Jayen (verified owner) –
Very well worth the money.
Lokesh (verified owner) –
I got my project done with these components Great Support
Ayush (verified owner) –
Drone parts i ordered and found ok
Devendra (verified owner) –
Good techinical knowledge
Akshay (verified owner) –
The product is firmly packed.
Roma (verified owner) –
Online best cost electronic components
Rahul (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Very fast delivery.
Harsh (verified owner) –
Very well worth the money.
Komal (verified owner) –
Very fast delivery.
Ketan (verified owner) –
Good support and recommended
Rohit (verified owner) –
Online best cost electronic components
Jayen (verified owner) –
I got my project done with these components Great Support
Priya (verified owner) –
Good service.
Rahul (verified owner) –
Good support and recommended
Devendra (verified owner) –
Good Stem kit
Harsh (verified owner) –
Good Kit