Search Results for: Raspberry Pi
Showing 1–16 of 17 results
-
Raspberry Pi Zero W (Wireless) With in-built Wi-Fi and Bluetooth – Headerless
Original price was: ₹3,000.00.₹2,137.74Current price is: ₹2,137.74. + GSTAdd to cartTechnical Specifications:
- 1GHz, single-core CPU
- 512MB RAM
- Mini HDMI and USB On-The-Go ports
- Micro USB power
- 11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
- HAT-compatible 40-pin header
- Composite video and reset headers
- CSI camera connector
-
L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board –
Original price was: ₹160.00.₹110.00Current price is: ₹110.00. + GSTAdd to cartIt can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage.
-
Eye Blink Sensor For boards compatible with Arduino, Raspberry Pi, AVR, PIC
Original price was: ₹350.00.₹251.58Current price is: ₹251.58. + GST -
Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
Original price was: ₹112.00.₹91.82Current price is: ₹91.82. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5?8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
-
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.₹41.87Current price is: ₹41.87. + GSTAdd to cartSpecification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,?4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
-
-
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Original price was: ₹312.00.₹246.16Current price is: ₹246.16. + GSTAdd to cartSpecification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
-
5V 1A Power adapter Supply with 5.5mm DC Plug Adapter
Original price was: ₹150.00.₹91.00Current price is: ₹91.00. + GSTAdd to cart5V 1A Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1.1 meters long connecting a cable. These adapters are designed to meet all types of power requirements of the Arduino board, Raspberry Pi and other electronic gadgets.
This adapter is compatible to handle up to 1A current so applications like toy cars, CCTV Cameras, Routers, Modems, Cordless Phones, Set-Top Boxes, Wireless Devices, and POS Machines are compatible with this adapter.
-
ZMPT101B AC Single Phase Voltage Sensor Module
Original price was: ₹200.00.₹109.33Current price is: ₹109.33. + GSTAdd to cartADVANTAGES of ZMPT101B AC voltage sensor
- Analog output corresponding quantity can be adjusted.
- Pcb board size : 49.5 (mm) x19.4 (mm)
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
-
DC 12V Lock Door Electric Lock Assembly Solenoid Small Electric Lock Access Control Lock for Door Cabinet Drawer Security Electronic Lock for All Kinds of Container Products
Original price was: ₹489.00.₹308.18Current price is: ₹308.18. + GSTAdd to cartSpecification
- Body Material : Iron
- Item color : Golden tone
- Rated voltage : DC 12V.
- Rated current : 0.80A.
- Power : 9.6 Watt
- Holding force : 0.25kg
- Energized forms : intermittent
- Unlocking time : 1S
- Weight : 150 gm
- Dimensions : 54 x 42 x 28 mm (LxWxH)
- Cable length : 20 cm
-
Single Channel 5v Relay Module with Isolation High Low Level Trigger
Original price was: ₹40.00.₹39.00Current price is: ₹39.00. + GSTAdd to cartRelays are output devices which are used to control or operate some external devices.? This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side.
-
MQ3 Alcohol Gas Sensor Module
Original price was: ₹159.00.₹107.90Current price is: ₹107.90. + GSTAdd to cartSpecification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
-
Turbidity Detection Sensor Kit | Liquid Water Particles Value Detection Sensor Module compatible with Arduino
Original price was: ₹1,269.00.₹817.62Current price is: ₹817.62. + GSTAdd to cartSpecifications :-
Working voltage DC 5V Working current 30mA [MAX] Response time <500 msec Insulation Resistance 100M [Min] Operating Temperature (C) -30 ~ +80 Length (mm) 33 Width (mm) 20 Height (mm) 12 Weight (gm) 55 -
MAX30100 Oximeter Heart Rate Beat Pulse Sensor 1.8V-3.3V Replace MAX30100 A5N2
Original price was: ₹250.00.₹106.92Current price is: ₹106.92. + GSTAdd to cartSpecification
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front-End
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
-
DC 3-5V Temperature Sensor Thermocouple Sensor for Arduino
Original price was: ₹70.00.₹54.12Current price is: ₹54.12. + GSTAdd to cartFeatures of KY 028 NTC Temprature Sensor Module
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specifications of?NTC Temprature Sensor Module
- Operating Voltage : 3.3 to 5 Volts
- Output Current : 15 mA
- Output Type : Digital (HIGH OR LOW)
-
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port (3.7-4.2V)
Original price was: ₹400.00.₹236.16Current price is: ₹236.16. + GSTRead moreFeatures
- Quad-band 850/900/1800/1900MHz ? connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8? speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with ?auto baud? detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
- AT command interface with ?auto baud? detection.
- Onboard IPEX socket that can be connected to external antenna.
- Breakouts for external 8W speaker and electret mic if you don?t want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL or SMA connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
-
HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor DC 5V
Original price was: ₹93.57.₹65.00Current price is: ₹65.00. + GSTAdd to cartUltrasonic Distance Sensor provides very short (2CM) to long-range (4M) detection and ranging. The sensor provides precise and stable non-contact distance measurements from about 2cm to 4 meters with very high accuracy. It can be easily interfaced to any?Arduino,?Raspberry Pi?or any other micro controller.