Sale!
Sale!Electronic Components Kit-DIY Projects-Small Prototyping Projects-For Science Projects-For Educational Purposes-For Learning-55 Components
₹784.00
1 in stock
This item: Electronic Components Kit-DIY Projects-Small Prototyping Projects-For Science Projects-For Educational Purposes-For Learning-55 Components
1 in stock
₹784.00
₹784.00
1 × Automatic Plant Watering System DIY Experiments Science STEM KIT (Assembled), 100% Tested
8 in stock
₹499.00
1 × Fire Detection Alarm System DIY Experiments Science STEM KIT (Assembled), 100% Tested
81 in stock
₹399.00
- Electronic Components Kit has everything needed to build a prototype. It consists of breadboard, LED, resistors, transistors and other generic components.
- Useful to build prototype | 55 components | Transistors | Resistors | All-in-one kit | Multiple components
- Package component count:58(311 pieces)
- The Electronic Components Kit is assembled for beginners willing to learn about building a prototype. It can be used in DIY projects to try out different ideas.
- This kit contains all the necessary components required to build a prototype. It can be used to design simple circuits and learn more about using these components in various projects.
Related products
- Add to cart
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
- Read more
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications.
- Add to cart
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
Add to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 – IN4 : relay control ports
- Add to cart
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
Reviews
There are no reviews yet.