BMP280 3.3 Digital Barometric Pressure Altitude Sensor High Precision Atmospheric Module Replace BMP180
₹46.02
Specification
| Operating voltage (v) | 1.71 ~ 3.6 |
| Peak current | 1.12mA |
| Operating Pressure | 300 hPa ~ 1100 hPa. |
| Operating Temperature | -40 ~ +85 °C |
| Length (mm) | 15 |
| Width (mm) | 12 |
| Height (mm) | 2 |
| Weight (gm) | 2 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 9 × 7 × 5 cm |
7 in stock
7 in stock
- BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BMP280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.
- BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- This module uses an environmental sensor manufactured by Bosch with temperature, a barometric pressure sensor that is the next generation upgrade to the popular BMP085/BMP180/BMP183 Sensor. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI; This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with Pa absolute accuracy, and temperature with accuracy. Because pressure changes with altitude and the pressure measurements are so good; you can also use it as an altimeter with meter accuracy.
- The BMP280 is the next-generation of sensors and is the upgrade to the BMP085/BMP180/BMP183 “ with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
1 review for BMP280 3.3 Digital Barometric Pressure Altitude Sensor High Precision Atmospheric Module Replace BMP180
Related products
- Add to cart
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
- Add to cart
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
- Read more
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications.
- Add to cart
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0°C to +70°C
- Storage Temperature Range : −65°C to +150°C
- Add to cartCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers.
Shubham (verified owner) –
Good quality.