3S 25A Lithium Ion BMS – For 11.1V Battery
₹159.00
Specifications
- Charging Voltage: 12.6V DC CC/CV
- Balance Voltage for Single Cell: 4.2V
- Max Continuous Charge/Discharge Current: 25A
- Overcharge Detection Voltage: 4.25V
- Overcharge Release Voltage: 4.15V
- Over Discharge Detection Voltage: 2.3V
- Over Discharge Release Voltage: 3.0V
- OverCurrent Detection Current: 35 A
- External Short Circuit Detection
- Automatic Recovery on release of fault condition
11 in stock
11 in stock
- The 3S 25A Lithium Ion BMS is a high quality BMS for Lithium Ion Battery. The module connects with 3 Lithium Ion cells connected in Series, so that they make up 11.1V Battery Pack. The BMS provides Over discharge protection, over current protection, and load short circuit protection. This BMS has a Balance Charge feature. The maximum continuous charge/discharge rate is 25A. It provides single connection point for charging as well discharging of the battery pack.
- The 3S 25A Lithium Ion BMS also has connections for the Temperature probe. The module will compensate the charging or discharging current for the temperature.
1 review for 3S 25A Lithium Ion BMS – For 11.1V Battery
Related products
- Read more
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications.
- Add to cart
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
- Add to cart
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055.
- Add to cart
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
- Add to cart
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
Mayur (verified owner) –
I got my project done with these components Great Support