Search Results for: LED
Showing 113–128 of 259 results
-
2.4 V Green LED 0603 SMD
Original price was: ₹20.00.₹11.48Current price is: ₹11.48. + GSTAdd to cartThe Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
-
3mm Red LED
Original price was: ₹2.00.₹0.82Current price is: ₹0.82. + GSTAdd to cartLight Emitting Diodes (LED) are the blinky things in your circuit. Its a must for indicating power in your project or as warning indicator or a status indicator. We use LED’s for things like Power indication, relay status, to check if RF data has been received or not, warning status etc. It is a perfect low cost solution for indication and debugging purpose.
-
Red LED 5mm, Light Emitting Diode (red in red) basic
Original price was: ₹3.00.₹0.49Current price is: ₹0.49. + GSTAdd to cartLight Emitting Diodes (LED) are the blinky things in your circuit. Its a must for indicating power in your project or as warning indicator or a status indicator. We use LED’s for things like Power indication, relay status, to check if RF data has been received or not, warning status etc. It is a perfect low cost solution for indication and debugging purpose.
-
Red LED 10mm
Original price was: ₹10.00.₹4.10Current price is: ₹4.10. + GSTRead moreThis is?10mm Red LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible.
-
Green 10mm LED
Original price was: ₹5.00.₹2.71Current price is: ₹2.71. + GSTAdd to cartThis is?10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible.
-
Hydroelectric Power Generation DIY Kit
Original price was: ₹600.00.₹499.00Current price is: ₹499.00. + GSTAdd to cart- Complete Kit: Includes turbine, LEDs, wires, and manual.
- Educational: Learn renewable energy and electricity generation.
- Easy Assembly: Beginner-friendly with clear instructions.
- STEM Focused: Encourages critical thinking and hands-on learning.
-
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
Original price was: ₹290.00.₹280.00Current price is: ₹280.00. + GSTAdd to cart- Microcontroller: The board is powered by the ATmega168PA microcontroller chip, which operates at 5V voltage and has a clock speed of 16MHz. This microcontroller offers a good balance of processing power and energy efficiency for a wide range of tasks.
- Improved Design: This version of the Pro Mini features enhancements over previous iterations, potentially including improvements in power efficiency, stability, and overall performance. These enhancements make it more reliable and efficient for use in diverse projects.
- Compact Form Factor: The Pro Mini module is designed to be compact and lightweight, making it suitable for applications where space is limited. Its small size allows for easy integration into various projects and enclosures.
- On-Board Components: The module comes with essential on-board components, including voltage regulator, crystal oscillator, reset button, and indicator LEDs. These components simplify the setup process and provide convenient debugging options.
- Easy Programming: The board can be easily programmed using a USB-to-serial adapter or an FTDI breakout board. It is compatible with the Arduino IDE, allowing users to write and upload code effortlessly for their projects.
- Versatile Connectivity: The Pro Mini features a standard 6-pin header for serial communication (TX, RX, GND), as well as digital I/O pins for connecting sensors, actuators, displays, and other peripherals. It also has analog input pins for reading sensor data.
- Low Power Consumption: With its optimized design and power-efficient components, the Pro Mini module is capable of operating on low power, making it suitable for battery-powered applications and energy-conscious projects.
-
Speaker Dust Cap 65mm Diameter Subwoofer Paper Dome Coil Cover Caps
Original price was: ₹3.00.₹2.40Current price is: ₹2.40. + GSTRead moreThe lip on the round edge would keep your speaker(coils) sealed and stop the dust and humidity. Made of high grade paper. Strong enough to resist scratch and stretch. Application:Dust cap protective dome is one of the audio maintenance or repair parts for speaker, woofers, subwoofer, and coils.
-
Compact Splicing Wire Connectors – 3 to 3 inline Electrical Connectors Blocks – Quick Wiring Cable Connectors
Original price was: ₹100.00.₹99.75Current price is: ₹99.75. + GSTAdd to cartElectrical connector shell is made of PC flame retardant, and the conductor is pure copper, which can be connected to solid wire and stranded wire. Imported stainless steel is used inside to lock the wires firmly without loosening, and because they can be reused, the wires can be disassembled or reconnected for multiple times. This …
-
DRV8833 2 Channel DC Motor Driver
Original price was: ₹60.00.₹56.00Current price is: ₹56.00. + GSTAdd to cartFeatures:
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
- Operating voltage: 2.7V to 10.8V
- Output current: 1.2A continuous (2A peak) per motor
- Motor outputs can be paralleled to deliver 2.4A continuous (4A peak) to a single motor
- Inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current and over-temperature
- Reverse-voltage protection circuit
- Current limiting can be enabled by adding sense resistors (not included)
-
4 Amp 250V Glass Fuse
Original price was: ₹7.00.₹2.20Current price is: ₹2.20. + GSTAdd to cartDescription:- 4 Amp 250V Fast Acting Glass Fuse use in electronic circuits to provide safety from short circuit and other power surges. These are also called as circuit protectors
-
15 Amp 250V Glass Fuse
Original price was: ₹7.00.₹2.20Current price is: ₹2.20. + GSTAdd to cartDescription:- 15 Amp 250V Fast Acting Glass Fuse use in electronic circuits to provide safety from short circuit and other power surges. These are also called as circuit protectors
-
Otto DIY Humanoid robot for Kids – 3D Printed DIY Robot with Arduino ( Note : Product color may vary )(Plastic Parts only)
Original price was: ₹3,149.00.₹1,720.74Current price is: ₹1,720.74. + GSTRead moreOtto DIY Humanoid robot for Kids-
1)Otto DIY Humanoid robot for Kids ( Note : Product color may vary )(Plastic Parts only)
2) Ultrasonic Sensor x 1
3) Arduino Nano Board x 1
4) Nano Cable x 1
5) SG90 Servo Motor x 6
6) 2 Cell Battery Holder x 1
7) Jumper wire Male to Female x 10
8) HC-05 Bluetooth Module x 1
9) MAX7219 8×8 LED Dot Matrix Display Module x 1
10) Buzzer x 1
11) Switch x 1
-
Otto Bread Edition Combo Kit ( Note : Product color may vary )(Plastic Parts only) (Copy)
Original price was: ₹3,000.00.₹1,195.76Current price is: ₹1,195.76. + GSTRead moreOTTO Interactive DIY Robot for Kids-
1) Otto Mustache Edition Combo Kit ( Note : Product color may vary )(Plastic Parts only)
2) Ultrasonic Sensor x 1
3) Arduino Nano Board x 1
4) Nano Cable x 1
5) SG90 Servo Motor x 4
6) 2 Cell Battery Holder x 1
7) Jumper wire Male to Female x 10
8) Buzzer x 1
9) Switch x 1
10) HC-05 Bluetooth Module x 1
-
Otto Mustache Edition Combo Kit ( Note : Product color may vary )(Plastic Parts only)
Original price was: ₹3,000.00.₹1,195.76Current price is: ₹1,195.76. + GSTRead more- Otto is an open-source, 3D printed robot that runs with the help of Arduino. Otto is an interactive Arduino robot and is a perfect learning tool for kids This 3D printed robot kit is an Humanoid MCU robot that has the capability to make sound, walk, dance, gestures, and avoid obstacles. It is programmable with block visual coding or Arduino IDE This DIY Arduino robot kit includes 4 x micro servo motors, a set of screws, Nano ATmega328, USB cable, , ultrasound sensor, buzzer, DuPont easy to connect cables F/F, AA battery case with switch (batteries not included) It uses ultrasound sensor for object detection and is expandable and customizable with 3D printing The Otto robot parts are 3D printed and are manufactured with a social impact mission to create an inclusive environment for all kids
-
Otto Bread Edition Combo Kit
Original price was: ₹3,000.00.₹997.34Current price is: ₹997.34. + GSTRead more- Otto is an open-source, 3D printed robot that runs with the help of Arduino. Otto is an interactive Arduino robot and is a perfect learning tool for kids This 3D printed robot kit is an Humanoid MCU robot that has the capability to make sound, walk, dance, gestures, and avoid obstacles. It is programmable with block visual coding or Arduino IDE This DIY Arduino robot kit includes 4 x micro servo motors, a set of screws, Nano ATmega328, USB cable, , ultrasound sensor, buzzer, DuPont easy to connect cables F/F, AA battery case with switch (batteries not included) It uses ultrasound sensor for object detection and is expandable and customizable with 3D printing The Otto robot parts are 3D printed and are manufactured with a social impact mission to create an inclusive environment for all kids
Products
-
Node MCU ESP8266 (CH340) With Panel-Mounted Enclosure - 014
Original price was: ₹321.05.₹299.00Current price is: ₹299.00. + GST
-
Hydroelectric Power Generation DIY Kit
Original price was: ₹600.00.₹499.00Current price is: ₹499.00. + GST
-
4WD Robo Chesiss for BO Motor with 4 X BO Motor and 4 X BO Wheel
Original price was: ₹530.30.₹460.32Current price is: ₹460.32. + GST
-
Node MCU ESP8266 Panel-Mounted Enclosure (*Node Mcu Not Included) - 014
Original price was: ₹136.32.₹110.50Current price is: ₹110.50. + GST
-
16 x 2 LCD Display + Table-Mounted Enclosure - 043
Original price was: ₹285.00.₹247.82Current price is: ₹247.82. + GST