PS2 Joystick Module Breakout Sensor
- This is JoyStick Module PS2 Breakout Sensor very similar to the analog joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressdown.
- With the helpof thisJoystick Module, you can measure position coordinates on the X and Y axis by moving the hat. It also contains a switch that is press-able by pushing the hat.It also contains aswitchthat ispress-ablebypushingthe hat down. Similar to the XBOX controller.
- The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
Perfect for use in various electronics projects in India, Joy stick PS2 Module Breakout Sensor,Dual Axis XY Joystick Module ensures reliability and performance. Ideal for various electronics projects, Joy stick PS2 Module Breakout Sensor,Dual Axis XY Joystick Module offers quality and performance.
33 ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 33 ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 33 ohm Resistor - 2 Watt offers quality and performance.
CD4017 Dip16 PIN IC
Top 10 Final Year Free Project Ideas for Mechatronics Engineering 2025–2026
Arduino UNO Board with 16×2 LCD Display Case (*UNO R3 Board and LCD Display Not Included) – 003
1 Meter GT2 Open Loop Timing Belt 6mm Width for 3D Printer
- Precision registration & high torque capability
- Virtually no elongation & reduced noise
- Wide speed range & lubrication-free operation
- Ideal for 3D printers & automation projects
- Durable NEOPRENE synthetic rubber construction
Perfect for use in various electronics projects in India, 1 Meter GT2 Open Loop Timing Belt 6mm Width for 3D Printer ensures reliability and performance. Ideal for various electronics projects, 1 Meter GT2 Open Loop Timing Belt 6mm Width for 3D Printer offers quality and performance.
Battery snap connector
Features :
- Excellent material
- Fine workmanship
- It is an environmental 9V battery buckle
- T- Fonts, with red and black connecting lines
- Save Power and Protect the environment
- Good electrical conductivity and comfortable sense of touch
Perfect for use in various electronics projects in India, battery snap connector ensures reliability and performance. Ideal for various electronics projects, battery snap connector offers quality and performance.
470K Kilo ohm Resistor – 0805 SMD Package
D45H11 – Bipolar (BJT) Transistor PNP 80 V 10 A
4.7 Volt 1/4 Watt Zener Voltage Regulator Diode
- Used in Voltage protection circuits
- Can be used as low current voltage regulator
- Input voltage protection for Microcontrollers or other ICs
- Voltage stabilizing circuits
Perfect for use in various electronics projects in India, Zener Voltage Regulator Diode 4.7 Volt 0.5 Watt ensures reliability and performance. Ideal for various electronics projects, Zener Voltage Regulator Diode 4.7 Volt 0.5 Watt offers quality and performance.
68uf 450v electrolytic capacitor
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, alluminium electrolytic capacitor 68uf 450v ensures reliability and performance. Ideal for various electronics projects, alluminium electrolytic capacitor 68uf 450v offers quality and performance.
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-Band TTL
Features
- Quad-band 850/900/1800/1900MHz connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8 speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with auto baud detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
- AT command interface with auto baud detection.
- Onboard IPEX socket that can be connected to external antenna.
- Breakouts for external 8W speaker and electret mic if you dont want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL or SMA connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
Perfect for use in various electronics projects in India, SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port (3.7-4.2V) ensures reliability and performance. Ideal for various electronics projects, SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port (3.7-4.2V) offers quality and performance.