Resistor 100K Ohms 1% 1/8W SMD 0805
MBR20100 – 100V , 10A Schottky Diode Switch Mode Power Rectifiers
20 A Total (10 A Per Diode Leg)
Guard?Ring for Stress Protection
Low Forward Voltage
175?C Operating Junction Temperature
Epoxy Meets UL 94 V?0 @ 0.125 in
Low Power Loss/High Efficiency
High Surge Capacity
Low Stored Charge Majority Carrier Conduction
Shipped 50 units per plastic tube
These Devices are Pb?Free and are RoHS Compliant
300 rpm – 12V Centre Shaft DC Geared Motor for robotics
DC Motor 300RPM 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly. Perfect for use in various electronics projects in India, 300 RPM-12V Geared Motors ensures reliability and performance. Ideal for various electronics projects, 300 RPM-12V Geared Motors offers quality and performance.
LM393 Photosensitive LDR Light-Dependent Control Sensor Module
ThisLM393 Photosensitive Light Dependent Sensor Moduleis using a high-quality LM393voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor thecomparator output signal gives a clean and good waveform. Perfect for use in various electronics projects in India, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU ensures reliability and performance. Ideal for various electronics projects, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Piezo Buzzer 35mm
Applications:
- Used in Medical Diagnostics
- Electric lighter
- Microphones.
Features:
- Clear sound
- Ultra-thin and lightweight
- No contacts: therefore, no noise and highly reliable
- Low power consumption for voltage type
- Excellent accessory for acoustic instrument pickups, stompboxes, contact mics, etc.
- Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
- 35mm brass outer diameter plate and ceramic inner diameter plate.
- All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
Perfect for use in various electronics projects in India, Piezo Buzzer 35mm ensures reliability and performance. Ideal for various electronics projects, Piezo Buzzer 35mm offers quality and performance.
1M ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 1M ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 1M ohm Resistor - 2 Watt offers quality and performance.
5mm Blue LED
4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW
Features
Low gate charge ( typical 16nC)
Fast switching
100% avalanche tested
Improved dv/dt capability Perfect for use in various electronics projects in India, 4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW ensures reliability and performance. Ideal for various electronics projects, 4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW offers quality and performance.
HC-SR501 PIR Sensor Infrared IR Body Motion Module
PIR Sensor is also called as Motion Sensor or Movement Sensor or is basically a Passive Infrared Sensor.
It is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. It detect the motion by detecting the changes in the IR levels emitted from the object.It can be used as motion detector for security systems or robotics. Perfect for use in various electronics projects in India, HC-SR501 PIR Sensor Infrared IR Body Motion Module ensures reliability and performance. Ideal for various electronics projects, HC-SR501 PIR Sensor Infrared IR Body Motion Module offers quality and performance.
3.5 rpm – 12V Centre Shaft DC Geared Motor for robotics
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module
- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
Perfect for use in various electronics projects in India, 0.96" 128 X 64 Blue Light I2C OLED Screen Display Module For DIY ensures reliability and performance. Ideal for various electronics projects, 0.96" 128 X 64 Blue Light I2C OLED Screen Display Module For DIY offers quality and performance.