Sale!
Sale!
Infrared IR Wireless Remote Control Module Kit for Arduino
Original price was: ₹180.00.₹138.37Current price is: ₹138.37. + GST
Specifications :-
| Effective angle | 60 |
| Transmission distance | up to 8m(depending on the surrounding environment, the sensitivity of the receiver, etc). |
| Sticking material | 0.125mmPET |
| Effective life | 20,000 times |
| Static current | 3uA 5uA |
| Dynamic current | 3mA 5mA |
| Battery | CR2025 Button batteries |
| Length (mm) | 86 |
| Width (mm) | 40 |
| Height (mm) | 6.5 |
| Weight (gm) | 10 |
3 in stock
- The Infrared IR Wireless Remote Control Module Kit for Arduino consists of ultra-thin infrared remote control and 38KHz infrared receiver module. This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
- IR receiver module can receive a standard 38KHz modulation remote control signal. You can decode the remote control signal through Arduino programming. You can design a variety of remote control robots and interactive works.
12 reviews for Infrared IR Wireless Remote Control Module Kit for Arduino
You must be logged in to post a review.
Related products
-
7476 Dual Master-Slave J-K Flip-Flop
Original price was: ₹90.00.₹61.50Current price is: ₹61.50. + GSTAdd to cart- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C
-
Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality)
Original price was: ₹139.00.₹136.50Current price is: ₹136.50. + GSTAdd to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 ? IN4 : relay control ports
-
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
-
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Original price was: ₹312.00.₹246.16Current price is: ₹246.16. + GSTAdd to cartSpecification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
-
1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant
Original price was: ₹1.15.₹0.82Current price is: ₹0.82.Add to cart1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
Rohit (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Drone parts i ordered and found ok
Ketan (verified owner) –
Very fast delivery.
Ayush (verified owner) –
The product is firmly packed.
Akshay (verified owner) –
Very fast delivery.
Vivek (verified owner) –
Good techinical knowledge
Mayur (verified owner) –
Very fast delivery.
Harsh (verified owner) –
Very fast delivery.
Rohit (verified owner) –
Good support and recommended
Rahul (verified owner) –
Good service.
Sneha (verified owner) –
Good techinical knowledge
Viral (verified owner) –
Good service.