Search Results for: microcontroller
Showing 1–16 of 80 results
-
ATMEGA8A – AU Microcontroller – (SMD TQFP Package) – 8-Bit 32 Pin AVR Microcontroller
Original price was: ₹175.00.₹174.00Current price is: ₹174.00. + GSTAdd to cartThe ATMEGA8A is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA8A achieves through puts approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.
-
8051 / AT89S52 /AT89S52-24pu at89s52 dip-40 atmel microcontroller chip ic
Original price was: ₹110.00.₹63.96Current price is: ₹63.96. + GSTAdd to cartFeatures:
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller
Original price was: ₹30.00.₹20.50Current price is: ₹20.50. + GSTAdd to cartThe TSOP1738 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP1738 is compatible with all common IR remote control data formats.
-
ATmega328P-U Microcontroller without BootLoader
Original price was: ₹695.52.₹210.00Current price is: ₹210.00. + GSTAdd to cartThis is ATmega328P-PU IC which also known as ATmega328P-U. So you may receive IC with printed name ATmega328P-U.The ATMEGA328P- U is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. -
14 Pin DIP IC Base-Socket-Base-Connector for Microcontrollers and IC’s/IC base-base IC
Original price was: ₹5.00.₹2.71Current price is: ₹2.71. + GSTAdd to cart14 Pin IC Socket base adaptor is a 14 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
-
28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
Original price was: ₹10.00.₹4.10Current price is: ₹4.10. + GSTAdd to cart28 Pin Narrow IC Socket base adaptor is a 28 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The IC base is for a narrow IC.
-
16 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
Original price was: ₹5.00.₹3.28Current price is: ₹3.28. + GSTAdd to cart16 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
-
40 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
Original price was: ₹10.00.₹5.74Current price is: ₹5.74. + GSTAdd to cart40 Pin IC Socket base adaptor is a 40 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
-
Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
Original price was: ₹112.00.₹91.82Current price is: ₹91.82. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5?8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
-
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
Original price was: ₹290.00.₹280.00Current price is: ₹280.00. + GSTAdd to cart- Microcontroller: The board is powered by the ATmega168PA microcontroller chip, which operates at 5V voltage and has a clock speed of 16MHz. This microcontroller offers a good balance of processing power and energy efficiency for a wide range of tasks.
- Improved Design: This version of the Pro Mini features enhancements over previous iterations, potentially including improvements in power efficiency, stability, and overall performance. These enhancements make it more reliable and efficient for use in diverse projects.
- Compact Form Factor: The Pro Mini module is designed to be compact and lightweight, making it suitable for applications where space is limited. Its small size allows for easy integration into various projects and enclosures.
- On-Board Components: The module comes with essential on-board components, including voltage regulator, crystal oscillator, reset button, and indicator LEDs. These components simplify the setup process and provide convenient debugging options.
- Easy Programming: The board can be easily programmed using a USB-to-serial adapter or an FTDI breakout board. It is compatible with the Arduino IDE, allowing users to write and upload code effortlessly for their projects.
- Versatile Connectivity: The Pro Mini features a standard 6-pin header for serial communication (TX, RX, GND), as well as digital I/O pins for connecting sensors, actuators, displays, and other peripherals. It also has analog input pins for reading sensor data.
- Low Power Consumption: With its optimized design and power-efficient components, the Pro Mini module is capable of operating on low power, making it suitable for battery-powered applications and energy-conscious projects.
-
Jumper Wire Set – Male to Female (M2M), Male to Female(M2F), Female to Female(F2F )(40 pcs each)
Original price was: ₹166.00.₹128.31Current price is: ₹128.31. + GSTAdd to cartApplications:
- Making Temporary Connections using Breadboard
- Used to create junction between Microcontroller and Sensors using breadboard externally.
- Electronic Experiment Prototyping
- Connecting with Berg Strip Headers
-
Arduino UNO R3 Development Board – Compatible Model High Quality
Original price was: ₹800.00.₹487.50Current price is: ₹487.50. + GSTAdd to cart- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
-
HR202 Humidity Detection Sensor Module
Original price was: ₹72.00.₹45.50Current price is: ₹45.50. + GSTAdd to cartUsing high-quality HR202 humidity sensor. The comparator output signal is clean, good waveform, driving ability, more than 15mA The humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity by adjusting the potentiometer, for detecting the humidity can change the threshold ( i.e. the humidity control), such as the need to …
-
ACS712 – 20A Range Current Sensor Module
Original price was: ₹107.00.₹105.00Current price is: ₹105.00. + GSTAdd to cartACS712 Current Sensor Module – 20A can sense upto 20A of current flow. Sensing and controlling the current flow is a fundamental requirement in wide variety of applications, which includes over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. ACS712 Current Sensor Module – 20A is based on …
-
ADS1115 16-Bit I2C ADC 4-Channel Programmable Gain Amplifier Module
Original price was: ₹185.00.₹156.00Current price is: ₹156.00. + GSTAdd to cartFeatures
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- It has an Internal low-drift voltage reference
- Internal Oscillator.
- Internal PGA.
- I2C INTERFACE : Pin-Selectable Addresses.
- Four single ends Or Two differential inputs.
-
2 Channel 5V SSR Solid State Relay Module
Original price was: ₹289.00.₹234.00Current price is: ₹234.00. + GSTAdd to cartFeatures
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.