24N60M2 N-Channel Enhancement MOSFET
Original price was: ₹200.00.₹148.50Current price is: ₹148.50.
Features
- Its low gate charge is typically 110nC
- Its operating voltage is 600V
- Its operating current is 23.5A
- Its used for fast switching applications
- Improved DV/DT capability
16 in stock
- 24N60M2 is a N-Channel Enhancement mode metal oxide field effect transistor its basically used for switching purpose its used for high switching and power switching applications, Its operating voltage is 600V, its forward current is 23.5A, it provides superior switching performance that is why its mostly used in switching applications like in SMPS, UPS, Power switching Etc.
7 reviews for 24N60M2 N-Channel Enhancement MOSFET
You must be logged in to post a review.
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
1N4007 diode
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability. Perfect for use in various electronics projects in India, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant ensures reliability and performance. Ideal for various electronics projects, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant offers quality and performance.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
Perfect for use in various electronics projects in India, 5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug ensures reliability and performance. Ideal for various electronics projects, 5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug offers quality and performance.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Zohar (verified owner) –
Good Kit
Roma (verified owner) –
Very well worth the money.
Paaji (verified owner) –
Less cost than other websites
Zohar (verified owner) –
Best cost electronic components in India
Ayush (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Very well worth the money.
Akshay (verified owner) –
Less cost than other websites